What does Service StabiliTrak do on a GMC Yukon?

Wheel Speed Sensor – If one of the wheel speed sensors is out, your Yukon will no longer be able to tell if all of the wheels are turning at the same speed. Without this data it’ll turn on the service StabiliTrak warning. Brake Pedal Switch – Your brake pedal switch does more than just control whether or not your brake lights are turned on or not.

What does the Service StabiliTrak warning light mean?

Service StabiliTrak Warning – The number one indication that something is wrong is your Yukon’s “Service StabiliTrak” warning light itself. Cruise Control – Without the StabiliTrak system functioning properly, your Yukon may disable the cruise control.

Why is my traction control not working on my Yukon?

Traction Control Not Working – Your Yukon’s traction control system mostly uses the same sensors to determine if a wheel has broken traction. Unlike StabiliTrak, which controls lateral issues (sliding), traction control keeps the wheels from unnecessary spinning.

What happens when StabiliTrak and traction control go off?

Both times the initial indication of “Stabiltrak disabled” came on, followed by “Service Stabilitrak” followed by “Service Traction Control” lastly followed by “Reduce Engine Power” and eventually the engine stalled out leaving…

Why does traction control go off on my GMC Yukon?

I had a 2011 Sierra that did similar and it was the steering wheel position sensor. At the time it was under warranty. It would come on and go off with no other symptoms. The dealership couldn’t find the issue.

What kind of traction control does a Silverado 1500 have?

Service Stabilitrak, Service Traction Control, and… Driving to work this morning my 09 silverado 1500 stalled out twice.

When does Traction Control / Stabilitrak off lights?

Same thing is still going on. CEL with the same codes, and intermittent service stabilitrak/traction control off lights (with the resulting super-hard shift out of first gear) when coasting or sitting at a red light, then after accelerating and getting out of first gear it usually goes off and acts normally until I start slowing down again.

When does traction control turn off Service StabiliTrak?

The “Service Stabilitrak” light will usually appear first and then the car will turn traction control off. Once traction control is turned off, the transmission beings to shift very hard and rough.

What does the StabiliTrak light on a Chevy do?

Stabilitrak is connected to your Chevy’s stability control system, your wheels and steering wheel via sensors, and to your brakes. Because its a connected system, multiple issues can cause the “Service Stabilitrak” light to appear in your Chevy.

What happens if the Stabilitrak system is not working?

Cruise Control – Without the StabiliTrak system functioning properly, your Yukon may disable the cruise control. Traction Control Not Working – Your Yukon’s traction control system mostly uses the same sensors to determine if a wheel has broken traction.

What does service stability track and traction control mean?

About a year ago, my 2008 Tahoe began sending “Stability Track Off, Traction Control Off, Service Stability Track, Service Traction Control”. The ABS light and another light pop up on the dash. This was happening off and on for the past 10-12 months. Now, there are more serious problems.

Why does my GMC Sierra have a StabiliTrak light?

Stabilitrak problems So in this video I had a 2008 GMC Sierra and will also be the same as the Chevy Silverado My stability track light was on and I found out that my brake lights were staying on too long. So it would cause the Stabilitrak Light to come on in the dash.

Why do you need Service StabiliTrak on a Lucerne?

Unlike StabiliTrak, which controls lateral issues (sliding), traction control keeps the wheels from unnecessary spinning. This helps avoid lateral acceleration altogether. Although it may be tempting to ignore the service StabiliTrak warning, it can really be dangerous not having it when you need it.

How much does GMC Yukon StabiliTrak light cost?

Took my car to the GM service center in Victorville today and service Manager Chuck had me talk to larry that did a service report… He stated that they would have to start with the vehicle throttle body and replace it at a cost of $561.00 and see if that would fix the problem…

Why does my GMC Canyon have a StabiliTrak light?

If these lights appear, it generally means these important safety features are being disabled. This issue can happen at any time with any of the GM vehicles. We are currently working on a claim involving a 2012 GMC Canyon where the StabiliTrak light has come on five times within the first 5,000 mile period.

What causes a GMC Yukon to lose its Stabilitrak system?

There are many things that can cause the StabiliTrak system to lose its ability to function. It is a complex system. Wheel Speed Sensor – If one of the wheel speed sensors is out, your Yukon will no longer be able to tell if all of the wheels are turning at the same speed.

When does Service StabiliTrak, service traction control pop up?

I have a 2012 Sierra 1500 and mine started doing this recently. It happens either immediately on start up or just a minute or so after. The message will pop-up “Service Stabilitrak, Service Traction Control” and then both will turn off. I do not get a Check Engine Light either.

What does Service StabiliTrak do on a GMC Sierra?

StabiliTrak is designed to help prevent accidents by giving you better control of your Sierra. If you have a service StabiliTrak warning, your Sierra will no longer be assisted when a loss in lateral traction is detected.

Why is my StabiliTrak disabled on my Chevy Tahoe?

After my last tire rotation it seems that the stabilitrak and traction control system has losts its mind. Every so often, nearly every 5 minutes and sometimes more frequesntly, the dinging and the message “stabilitrak disabled”/ “service stabilitrak”/ “service traction control” (one of those) comes up.

Cruise Control – Without the StabiliTrak system functioning properly, your Sierra may disable the cruise control. Traction Control Not Working – Your Sierra’s traction control system mostly uses the same sensors to determine if a wheel has broken traction.

What causes Service StabiliTrak to come up on my dash?

The common issues with these systems are a reading from an input sensor, a faulty controller, or a bad connection. All are relatively easy to repair, but may take some time to diagnose.

When does the ABS light come on on a GMC Yukon?

Your GMC Yukon’s ABS Light comes on when it fails a self diagnostic cycle. When on, it indicates that the Yukon does not have Anti-Lock brakes, and the safety they provide. Your Yukon’s ABS system uses a system of sensors to determine wheel speed when braking.

What causes a flashing check engine light on a GMC Yukon?

Other Issues: Flashing Check Engine Light- GMC Yukon While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Yukon’s ignition system or fuel system (as stated above), there are other issues that can cause it.

What kind of warning lights are on a GMC Yukon?

They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are over 40 of them, so search carefully! Models examined include Acadia, Savana, Sierra, Terrain, and Yukon.

What does the brake light on a Yukon mean?

The brake light indicates that there is a problem with the physical braking system and that your Yukon is unsafe to drive. Yes, you can drive your Yukon with the ABS light on.

What kind of rating does GMC Yukon XL have?

In government crash tests, the 2008 GMC Yukon XL was awarded five stars for protecting the driver and passenger in a frontal collision. For such a big truck, the 2008 GMC Yukon XL is fairly quick, particularly in Denali guise.

Navigation