How often should you change the cambelt on a Peugeot 407?
Spoke with my local Peugeot dealer re cambelt change interval for a 407 2.0L HDi and he assured me that the correct interval for a car used under normal conditions is 160,000 miles, or 10 years! After googling some French sites I believe he is right.
Is the Pug 407 SW zenith a good car?
Owned my 2006 Pug 407 SW Zenith now for 6 weeks. DEEE-lighted! After reading so much negative stuff about the 407’s, wondered if I was making the right decision. I had previously owned a 306 Meridian which i have to say never let me down so the beautiful 407 became my car of choice. Re the cambelt change.
When did the Peugeot 504 406 come out?
Some of the most noteworthy models of the company are the 504 from 1969, the 405 from 1988, the 406 from 1996, the 307 from 2002, the 206 from 1999.
What kind of specs does Peugeot 407 2.0 HDI have?
This specs showing the detailed performance of the Peugeot 407 2.0 Hdi (136PS) are an average of the information provided by the car manufacturer “Peugeot” and various tests carried out by the specialized press.
Which is better Peugeot 407 or Alfa Romeo 75?
Better, the Alfa Romeo 75 1.8 ie (122PS) is squarely behind the same 0 to 100 kph ! This specs showing the detailed performance of the Peugeot 407 2.0 Hdi (136PS) are an average of the information provided by the car manufacturer “Peugeot” and various tests carried out by the specialized press.
What was the problem with my Peugeot 2.0 turbo solenoid?
Anyway booked it into his local garage who “specialise” in Peugeot. He hooked it up to a fault reader which said that there was a fault with the turbo solenoid. He stripped it down and said he couldn’t find anything wrong with it. Took it to his pal who had more technical equipment and his apparently diagnosed an intermittant fault with the EGR.
What makes a Peugeot 2.0 HDI a 110hp?
That makes it a 110hp 16-valve HDi. It would be interesting to know if that code has returned, as David is quite right; the code is for a fault somewhere in the whole circuit – not necessarily in the valve itself. Maybe give the dealer a chance to have a more successful try – but don’t pay any more.
How do you tighten up a serpentine belt?
Another tensioner pulley uses a square-faced bolt for adjustment, and a third uses a large tab that can be set to a certain position for proper belt tightness. To remove an old serpentine belt, or to tighten up a new one, the tensioner bolt on the tensioner pulley is turned until proper tightness is achieved.
How often should timing belt be replaced on Peugeot 307?
Peugeot recommend: 307: →06/05: Replacement every 96,000 miles or 10 years under normal conditions. Replacement every 80,000 miles or 10 years under adverse conditions. 07/05-07: Replacement every 160,000 miles or 10 years under normal conditions. Replacement every 108,000 miles or 10 years under adverse conditions. 2008→:
Where do I find the serpentine belt routing diagram?
Find the serpentine belt routing diagram. Many cars come with a sticker in the engine bay that shows exactly how the serpentine belt is supposed to be routed through the various pulleys on the engine. If your vehicle does not have a sticker, you will need to find another way to remember how the belt should be run.
Where do I find the serpentine belt on my car?
To access the serpentine belt, you will need to open the hood of the vehicle. The hood release can usually be found near the door on the driver’s side of the vehicle. With the hood released, you will also need to release the safety latch located at the front of the vehicle.
How is the tension set on a serpentine belt?
Depending on the application, your serpentine belt will either have tension placed on it using a movable bracket or an auto tensioner pulley. This pulley uses an internal spring to apply consistent pressure to the belt at all times. If your vehicle does not have a tensioner pulley, the alternator bracket is likely how tension is set on the belt.
What happens if a serpentine belt goes bad?
The serpentine belt in most modern vehicles transfers power from the crank pulley to the various accessories mounted on the engine. A worn or damaged serpentine belt can fail to adequately transfer the power, leaving your alternator, power steering, and air conditioning failing to function.
How do you remove a serpentine belt from a battery?
Use the appropriate sized wrench or socket to loosen the nut holding the black ground cable on the negative terminal of the battery. Slide the cable off of the terminal and tuck it to the side of the battery. You will not need to disconnect the positive terminal. Locate the serpentine belt.
Spoke with my local Peugeot dealer re cambelt change interval for a 407 2.0L HDi and he assured me that the correct interval for a car used under normal conditions is 160,000 miles, or 10 years! After googling some French sites I believe he is right.
How did you find a Peugeot central cambelt?
How did you find Peugeot Central?: Google Only the DW10BTED4 engine has a slave cam shaft drven via a chain – the main drive is a belt. How did you find Peugeot Central?:
When to change the timing belt on Peugot?
You will need to do a lot of school runs to knock up 75k unless its nearly there now, in which case I would change it now as its 6 years old.. If you’re doing two cold starts a day,change it as soon as possible;it’s the starts that’ll break it. If you’re doing two cold starts a day,change it as soon as possible;it’s the starts that’ll break it.
Owned my 2006 Pug 407 SW Zenith now for 6 weeks. DEEE-lighted! After reading so much negative stuff about the 407’s, wondered if I was making the right decision. I had previously owned a 306 Meridian which i have to say never let me down so the beautiful 407 became my car of choice. Re the cambelt change.