How to troubleshoot a mass air flow sensor?
Check the connector for a correct fit and good contact. 2. Check the mass air flow sensor for damage. 3. Check the measuring elements for damage. 4. Check the voltage supply with the ignition switched on (circuit diagram for pin assignment is necessary). Ref. value: 7.5 -14 V. 5.
How does an air flow mass meter work?
An Air Flow Meter, AFM or Air Mass Meter, measures the air flow or air mass that is drawn into the intake of the engine. This measurement is transmitted as a frequency or a variable voltage to the ECM, ECU, or PCM so that it can calculate the correct amount of fuel to deliver via the injectors in relation to the air going into the engine.
Who are the manufacturers of air flow meters?
Injectronics can test, repair and remanufacture many brands of Air Flow Meter (AFM) and Air Mass Meters (AMM), including Bosch, Delco, Delphi, Hitachi, Kefico, Lucas, Mitsubishi, Nippon Denso, Siemens and VDO.
How does an injectronics air flow meter work?
Injectronics tests and calibrates all air meters using an air flow analyser test bench, which flows air through the meter and precisely checks the output of AMM’s and AFM’s compared to learnt OEM specifications.
Can a mass air flow sensor be repaired?
The sensor, however, may not be broken. Instead, it may just need to be cleared of any dust or debris that has gotten into the intake system. Open the hood of your vehicle and locate the mass air flow sensor on or near the larger air cleaner box.
An Air Flow Meter, AFM or Air Mass Meter, measures the air flow or air mass that is drawn into the intake of the engine. This measurement is transmitted as a frequency or a variable voltage to the ECM, ECU, or PCM so that it can calculate the correct amount of fuel to deliver via the injectors in relation to the air going into the engine.
Injectronics can test, repair and remanufacture many brands of Air Flow Meter (AFM) and Air Mass Meters (AMM), including Bosch, Delco, Delphi, Hitachi, Kefico, Lucas, Mitsubishi, Nippon Denso, Siemens and VDO.
Injectronics tests and calibrates all air meters using an air flow analyser test bench, which flows air through the meter and precisely checks the output of AMM’s and AFM’s compared to learnt OEM specifications.
Check the connector for a correct fit and good contact. 2. Check the mass air flow sensor for damage. 3. Check the measuring elements for damage. 4. Check the voltage supply with the ignition switched on (circuit diagram for pin assignment is necessary). Ref. value: 7.5 -14 V. 5.
What are the symptoms of a bad air flow sensor?
The most common symptoms from a bad mass air flow sensor are slow accelerating and reduced engine power. You can also notice a difference in the fuel economy as the main function of the mass air flow sensor is to let the engine know how much fuel it should inject.
How much does it cost to replace a MAF sensor?
MAF Sensor Replacement Cost. A Mass Air Flow Sensor is not so cheap but it is not very expensive either. You could get one for $120 – $300 to which you should add labor costs of $80 – $100. Therefore, on average you are expected to pay $200 to $400 in total for a mass air flow sensor replacement.
Can a bad MAF sensor be an engine glitch?
The same glitch can be the outcome of an issue with the engine control system. So, diagnose it if the MAF sensor turns out to be fine. In fact, it is hard to detect this symptom of bad mass airflow sensor when the control system runs smoothly. You have to look into a change in the mileage to spot this issue.