What happens when the brake switch fails on a Honda Accord?
The brake switch is what is clicking. When the brake switch fails, you also won’t be able to move the shifter out of “park” without using the shift lock release on the shifter boot.
How to replace a brake light on a Honda Accord?
Pull the cover down to remove it. Use the fuse diagram on the underside of the cover to locate the fuse for the brake light. Pull this fuse for the brake lights with a fuse puller. If the fuse is blown, you must replace it with a new fuse of the same amperage.
What does it mean when the brake switch fails?
When you press on the brake pedal, the switch closes and the brake lights light up. If you depress the actuator arm and the brake lights aren’t lighting up (and everything else is otherwise OK with the brake system), then this is a clear indication that the brake switch had failed.
What to do if your brake light does not work?
If it does not click, the switch has failed. Press on the brake pedal when you have installed the new bulb or new fuse. Have your assistant go around to the back of the vehicle to check and see if the brake lights are illuminated. If they are not, your brake light switch has failed.
How to troubleshoot a brake switch on a Honda Accord?
Troubleshooting the brake switch on the Accord is very simple, but you must have an assistant to help you. Check the brake light bulbs to make sure they are not blown. The filament inside the bulb should be intact. Remove the bulbs by opening the trunk and pulling off the inside cover.
What causes a Honda Accord to get stuck in Park?
An electrical problem with the brake light switch usually leads your shift lever to be stuck in park. If you inspect and notice the brake light switch tip is broken, you will have to replace it.
Where is the brake light fuse on a Honda Accord?
Your fuse box is located under the hood, and the owner’s manual will display the exact location of the brake light fuse. If the fuse is blown, replace it. This should resolve your issue. You should also check the backup light fuse. This fuse is located in the driver’s side fuse box, which is located near the hood release latch. Figure 1.
How can I tell if my Honda Accord transmission is working?
First, try to listen for the shift interlock solenoid engaging when you press the brakes. If you hear a little click coming from the shift lever, you can be certain that it’s working properly. It should make another sound after you release the brake pedal, so pay attention.