Why is my Jeep making a rattling noise?
While there are a variety of reasons your Jeep Wrangler is rattling, the most common 3 are the ball joints, struts or strut mount, or a problem with the sway bar links.
How do I fix the tailgate rattle on my Jeep?
Use some electrical tape or silicone to fix a gap in the tailgate. If a little tape or silicone doesn’t correct the problem, some adjustment to the latching assembly might be needed. The specific parts that can be adjusted are the striker, stabilizer, and stabilizer cup.
How do you adjust the tailgate on a Jeep Wrangler?
There are adjusting plates inside the Tailgate which will give you the play you need. Moving the Wood shims under the tailgate to give you clearance is highly recommended. Loosen all 4 bolts only SLIGHTLY and then move the shims under – get it where you want it and then tighten everything up. That should do it.
How do I stop my Jeep spare tire from rattling?
The cheapest and most effective thing I found was to open the gate, loosen the two bolts that hold the black plastic bump-stop in the gate latch itself, and slide it so that it is tighter contact when the gate is closed. Re-tighten the bolts. Noise fixed.
How many gears does a Jeep Wrangler have?
These transmissions feature four forward gears including one overdrive gear. With an aluminum housing, the NV1550 was a short-lived 5-speed manual transmission for Jeep Wranglers. This is a light duty trans fitted with 5 forward gears including 1 overdrive gear.
What kind of noises do you hear when you shift gears?
Use some fast acceleration, allowing the transmission to firmly shift. Listen for any rumbling, growling or mechanical metal-to-to metal noise in each gear just after it shifts. Such noises indicate problems with the individual planetary gears, input shaft or interior transmission bearings.
What are the gear ratios on a jeep 904?
904: A light duty 3 speed automatic used in CJs from 1980-1986 only with the I4 engine. It was also used during this time period with XJs and MJs with the I4 and V6 engine. Gear Ratios: 1st Gear: 2.74:1, 2nd Gear: 1.54:1, 3rd Gear: 1.00:1, Reverse Gear: 2.03:1
What kind of drivetrain does a Wrangler have?
A Wrangler’s drivetrain is its bread and butter. That said, there is always room for improvement, or to hone it to your off-road needs. Stronger axles, different gear ratios, and even a tougher differential will help you tackle more difficult trails. Wranglers are known to have a terrain capable and rugged drivetrain.