What does the code p0010 mean on an engine?
The P0010 code may also be accompanied with other codes such as: P0011, P0012, P0020, P0021, P0022, and maybe more. P0010 is a generic OBD-II code indicating an issue with the engine control module (ECM) detecting a variation in the mechanical timing between the crankshaft and bank 1 camshaft.
How long does it take to diagnose a p0010 Chevy?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P0010 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type.
How to diagnose p0010 Chevrolet intake camshaft position actuator?
Start by checking the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P0010 CHEVROLET code is 1.0 hour of labor.
What is the OBD2 code for a Mazda OBDII?
OBDII Mazda Code Definitions. Be sure to double check the codes. Anything P1000 to P1999 or P3000 to P3400 will be Manufacturer specific and may not match the ones listed here. Check specific manufacturer pages on the site, as some of them, we list the OBD2 codes on those pages for those specific vehicles.
When do I get a p0010 error on bank 1?
When the Engine Control Module tries to adjust the timing of the Bank 1 intake camshaft with one of these oil control valves, and it alerts an electrical issue with the solenoid windings in the valve or the circuit that goes into the valve, the code P0010 error is triggered.
What’s the best way to clear a p0010 code?
The code can also often be cleared through a simple oil flush and cleaning the actuator solenoid. As with many auto repair issues the simplest solution is often the most effective one. The key is to perform a thorough diagnosis before replacing expensive components. The best ways of repairing a P0010 code are:
What is the trouble code for a camshaft?
P0010 is a diagnostic trouble code (DTC) for “”A” Camshaft Position Actuator Circuit (Bank 1)”. This can happen for multiple reasons and a mechanic needs to diagnose the specific cause for this code to be triggered in your situation. Our certified mobile mechanics can come to your home or office to perform the Check Engine Light diagnostic.
What does error code p0010 mean on HHR?
This HHR had a had error code P0010 . Replacing the exhaust cam position actuator solenoid valve fixed it.Variable valve timing solenoid valve. But I went age and replaced Both Solenoids. if you want to help out the channel, just use my Amazon link when sopping at amazon. Follow me on twitter. https://www.instagram.com/falcons_hob…