How do you clear the UE code on a Samsung washer?
If UE error or any other error occurs, programs may be stopped by pressing and holding start/stop button (this method works in many models). After Samsung washing machine lets you to open the door, you need to properly sort out the laundry in the tank or remove excess items.
What does EU mean on my washer?
The uE/UE code indicates that the washer is attempting to balance the load, which may be the result of the unit not being leveled correctly or the load itself. This code can be easily resolved without the need of a technician.
How do I fix UE error?
Follow the solutions below to fix the issue and clear the UE error code.
- Make Sure the Load is Balanced.
- Run a Rinse and Spin Cycle.
- Check That the Washer Is Level.
- Adjust the Legs to Level the Washer.
- Check the Leveling Legs.
- Check the Rotor Mounting Nut.
- Check the Suspension Rods or Shock Absorbers.
- Check the Hall Sensor.
What does your code mean on Samsung washer?
For example, Samsung’s washer error code UR means an unbalanced load along the drum axis. In simple words, the drum is loose and cannot pick up the required speed.
How do I unlock my Samsung washer?
Normally waiting for the cycle to end is all you need to do to unlock the door, or turn your washer on if it’s off. If you get stuck, though, you can drain the water from front load washers using the emergency drain hose; once the water is gone, the door will unlock.
What is UC error in Samsung washing machine?
The UC error indicates power problems. If the washing machine faces an increase or decrease in voltage, then during the washing process it shows an error. The UC error lights up on the washing machine display when the system fixes an abnormal voltage for 30 seconds.
What does UC mean on Samsung washer?
The meaning of the UC error code The UC error indicates power problems. If the washing machine faces an increase or decrease in voltage, then during the washing process it shows an error. The UC error lights up on the washing machine display when the system fixes an abnormal voltage for 30 seconds.
How do I fix my Samsung Code?
Occasionally, the UR error code is caused by a fault with the electronic controller, which has mistakenly identified an unbalanced load error when there is none. Resetting the washer by disconnecting the power to the washer for 10 minutes should fix the issue.
Why is my Samsung washing machine showing a UE code?
My Samsung washing machine is showing a UE code during a spin cycle. What can I do? Your appliance will display a UE code when it has detected an unbalanced load and has stopped the spin for safety reasons. Make sure the appliance is on a flat, stable surface, then follow the steps outlined below.
What does UE stand for in washing machine?
UE Error Code – Washing Machine. The uE/UE code indicates that the washer is attempting to balance the load, which may be the result of the unit not being leveled correctly or the load itself. This code can be easily resolved without the need of a technician.
Why do I get an E4 error on my Samsung washer?
Do not confuse the E4 error with 4E code, caused by a problem of the water intake system. In some models, a DC error can mean not a tightly closed washing machine door. It is useful to note that DC and UE codes in most cases are for informational purposes.
What to do when your washing machine says UE?
The washing machine is now ready for use. With any washing machine, it is vital to ensure that the load is evenly balanced when using a spin cycle. If your washing machine displays the code “UE”, try redistributing the load by adding or removing items to ensure a more balanced load.