How do I update COMAND navigation?

Posted on 03/15/2020 by Arif Clayton

How do I update COMAND navigation?

Instructions

Start your Mercedes-Benz engine.
Turn on COMAND.
Locate the navigation DVD slot.
If you have a firmware update disk, insert it and allow the update to install.
Insert Mercedes navigation DVD.
Close control unit door by pressing the EJECT button on the COMAND.
Wait for the COMAND maps to be updated.

What is Mercedes Comand Online system?

The mid-level COMAND Online system features a bigger 10.25-inch dashboard display with better graphics, 3D maps, a built-in hard drive and voice controls. It actually consists of two 12.3-inch screens under one piece of glass – one in front of the driver, the other on the dashboard.

How to upgrade Mercedes COMAND APS NTG 2.5?

The choices are few and are essentially a diagnostic menu. One more hidden menu is called the “dealer menu” that comes with the sequence hangup + 7 + 9. From this you can upgrade the DVD mechanism and save all settings and parameters (phone numbers, old addresses GPS etc) to an SD card. This image has been resized.

What kind of screen does Mercedes COMAND NTG 2.5 have?

COMAND NTG 2.5 has a 6.5″ LCD screen and is installed on many 2009 to 2012 Mercedes-Benz models including ML, GL, R, SLK, SL, E classes. Main features include: support for (CD-MP3 / WMA / MPEG4 / DVD), Built-in Navigation System, Built-in Bluetooth, AM/FM tuner, HDD 40 GB, SDHC / SD Card Slot (up to 32GB), Built-in Amplifier.

When did the COMAND APS NTG-U-may come out?

Comand NTG4 first made its appearence in the W204 C class at lauch around 2007. It was the first Mercedes system to support a fully integrated iPod / USB system called the Media Interface, and Bluetooth telephony within the head unit. It also has an integrated Hard Disk for the Sat Nav map, and music, and a PCMCIA slot for adding music files.

Are there different versions of the Mercedes COMAND system?

There have been many variants of the Mercedes COMAND technology, and often the same technology looks different in different vehicles as the front of the stereo changes. The systems so far, in approximate release order, are Comand 2.5, Comand 2.0, Comand 2.0 MOPF (all known as Comand 2), Comand NTG1, NTG2, NTG3, NTG4, NTG2.5 and NTG4.5.

When did Mercedes Benz Comand APS NTG come out?

Mercedes Benz then produced a cost reduced system which it introduced into the W203 C and W209 CLK for the mid 2004 facelift (approx March 2004 production onward) and then was released with the new model A, B, ML, GL and R class vehicles, it is also fitted to the Smart forfour, and the W639 Vito/VIano vehicles.

When was COMAND NTG5 introduced in Mercedes Benz GLC?

Introduction Mercedes introduced COMAND NTG5 in the W222 S-Class at launch in 2013. This systems was strangely known as NTG5*2 internally. It was then installed in the W205 C-Class at launch and used on the GLC, AMG-GTS and the W447 Vito.

How do I update Comand navigation?

Posted on 12/02/2019 by Arif Clayton

How do I update Comand navigation?

Instructions

Start your Mercedes-Benz engine.
Turn on COMAND.
Locate the navigation DVD slot.
If you have a firmware update disk, insert it and allow the update to install.
Insert Mercedes navigation DVD.
Close control unit door by pressing the EJECT button on the COMAND.
Wait for the COMAND maps to be updated.

What to do when your navigation system won’t work?

During this time don’t start the car, open doors or even unlock the vehicle. You want your Mercedes-Benz to go to “sleep.” After the waiting period reinserting the navigation disk into the DVD slot and try to power up your COMAND system. Press NAVI button and wait for the system to restart. If that doesn’t work go to the next step.

How to troubleshoot a GPS navigation unit in a car?

1 Turn the vehicle key to ACC or IGNITION position. 2 Connect the power cable to the GPS navigation unit if it is a stand-alone unit. 3 Check the fuses in the fuse panel. It’s normally on the driver-side of your car. Replace any blown fuses. 4 Make sure the battery is fully charged if it has a battery.

What does it mean when it says navigation cannot be activated?

Error message “Navigation CanNot be Activated” usually means that the Navigation system is not being able to start up (boot up) which could be due to several reasons. Common problems include wrong DVD disk, issues with the navigation processor A40/3n2 or fault in CAN bus (controller area network) communication.

Why is my Mercedes navigation not working properly?

All the units which are part of the fiber optic need to be in proper working condition. If your Mercedes uses a separate drive for the NAVI DVD, it is possible that this unit can be defective. Learn more about fiber optic problem by reading Mercedes Audio System Explained. The DVD drive that holds your navigation disk could be damaged.

How to troubleshoot common problems with a GPS navigation unit?

Make sure the GPS antenna is connected and has a clear line of sight to the sky. If you have a GPS unit that is installed in your car’s dashboard console, check to make sure the antenna is connected properly. If it is possible to move the antenna, try moving it to a different location that has a clear line of sight to the sky.

What to do if your navigation is not working?

If that doesn’t work go to the next step. Try resetting the COMAND system by removing the fuse for 15 minutes. Reinsert the fuses and check if the error message is gone. Check all the cables and connections in the back of the COMAND or the DVD drive. Especially if work was done near those units.

How to fix a Mercedes Benz navigation system?

Doing a soft reset for these systems will force the head unit to rest. This normally restores the systems to working order. Chances are the symptoms may return. If this happens repeatedly, a professional Mercedes Benz repair technician or mechanic can help check any updates for your COMAND / navigation unit. Find the fuse box under the dashboard.