Where is the oil drain plug on my Craftsman riding lawn mower?
The hood on the Craftsman riding mower is hinged at the front. Open the hood to locate the oil drain plug by lifting under the rear edge near the steering wheel and raising it straight up. Once you have located the drain plug, close the hood by rotating it downwards.
How do you drain old lawn mower oil?
If you have a push mower, begin by propping the mower deck up so that the spark plug is facing up. Place the oil-safe container under the mower. Using a socket wrench, unscrew the oil plug counter clockwise until oil can escape. Empty oil from mower into an oil-safe container, such as an oil drain pan.
How do you change oil in a craftsman riding mower?
Clip an oil drain sleeve onto the oil drain port. Place an oil drain pan on the ground directly under the oil drain sleeve so that oil will flow into the pan. Remove the drain plug by turning it counterclockwise with a pair of pliers, and allow the oil to drain from the engine into the oil drain pan.
Where is the oil drain plug on a craftsman lawn mower?
In the Craftsman model with 6.0 and 6.5 horsepower, they do have the oil drain plug at the bottom of the machine behind the blade. So we will teach you how to change oil in Craftsman lawn mower for these models. Prepare 18 ounces of oil either SAE 30 or SAE 5W-30.
How do I drain and refill the transaxle on my Craftsman?
To drain the oil from the transaxle you will have to remove the transaxle from the tractor. There is a 1/2 inch plug on the upper right side of the transaxle to remove and pour the oil out and refill the transaxle. The transaxle takes 10w40 oil and it takes between 6 and 7 quarts of oil to fill it.
Where is the plug to change the oil on a craftsman 700?
Once the plug, or cap, is located, changing the oil is a straightforward process. A drain pan is placed on the ground to the left side of the mower.
How do you drain oil from a craftsman riding mower?
Draining the Oil. To drain the motor oil from the engine, pull the yellow drain plug off of the engine by hand. A tether attached to the plug will keep it from getting lost. Push the drain tube that came with the mower onto the fitting that’s revealed after you remove the plug. Place a drain pan under the tube.
To drain the oil from the transaxle you will have to remove the transaxle from the tractor. There is a 1/2 inch plug on the upper right side of the transaxle to remove and pour the oil out and refill the transaxle. The transaxle takes 10w40 oil and it takes between 6 and 7 quarts of oil to fill it.
Where is the drain plug on a craftsman riding mower?
Once you have located the drain plug, close the hood by rotating it downwards. The drain plug should be fairly easy to spot. The plug will be located near the bottom of the engine. Observe the bottom of the engine where it attaches to the mower’s frame.
When to change the oil on a craftsman 675?
The manufacturer of these engines recommends the initial engine oil change after five hours of use, and after 25 hours of use thereafter. Changing this oil is a straightforward process. Pull the sparkplug wire off the sparkplug and rest it on the stub at the top of the cylinder head.