What kind of Fuse does a Hyundai Santa Fe have?

Hyundai Santa Fe (2004 – 2006) – fuse box diagram Year of production: 2004, 2005, 2006 Engine compartment Description Ampere rating [A] Protected components FUSIBLE LINK ALT 120 Generator B+ 50 Tail lamp relay, Fuse 11~17, Power connector IGN 50 Start relay, Ignition switch BLR 40 A/C Fuse, Blower relay ABS.1 30 ABS control module, …

When did the Hyundai Santa Fe come out?

In this article, we consider the first-generation Hyundai Santa Fe (SM), produced from 2001 to 2006. Here you will find fuse box diagrams of Hyundai Santa Fe 2004, 2005 and 2006, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Where is the fuse box on a Hyundai i20?

The fuse box is located in the engine compartment (left-side). Inside the fuse/relay panel covers, you can find the label describing fuse/relay name and capacity.

Where is the fuse box located in a car?

The fuse box is located in the engine compartment (left-side). Inside the fuse/relay panel covers, you can find the label describing fuse/relay name and capacity. Not all fuse panel descriptions in this manual may be applicable to your vehicle. It is accurate at the time of printing.

What to do if your Hyundai Santa Fe a / C is not working?

This way, you will know which services and Hyundai air conditioning parts to get to restore your A/C into the original working condition. Let’s proceed by taking a look at some of the most common Hyundai Santa Fe A/C problems: The A/C compressor is one of the most important components of any vehicle’s air conditioning system.

Where are the ignition coils on a Hyundai Santa Fe?

Schematic Diagrams ECM Terminal And Input/Output signal ECM Terminal Function Connector [C100-A] Pin No. Description Connected to 1 Ignition Coil (Cylinder #2) control output [NON-smart key type] Ignition Coil (Cylinder (Option/accessory.)

Why is the radiator fan not working on my Hyundai Santa Fe?

The wiring harness itself can go bad. Your author has personally had a shredded tire completely pull the fan wiring out of his vehicle. It can happen. The fan wiring is some of the more vulnerable wiring in your Santa Fe. You can test the voltage going from the fan relay to the fan itself. If it is getting 12+ volts, the fan should be coming on.

What kind of transmission does Hyundai Santa Fe have?

Apart from that, it also comes with different drivetrain and transmission options. Some of the transmissions are 5-speed manual, 6-speed automatic (2010 model), 5-speed automatic, 4-speed automatic ones.

What are the lights on a Hyundai Santa Fe?

MULTIFUNTION SWITCH, STEERING ANGLE SENSOR, ESC SWITCH, ATM KEY LOCK CONTROL MODULE SEAT WARMER MODULE KEY SOLENOID, SPORTS MODE SWITCH, SEMIACTIVE SOLENOID (GASOLINE) INSTRUMENT CLUSTER, LUGGAGE LAMP, MAP LAMP, REAR PERSONAL LAMP

Where are the fuse panels on a Hyundai Santa Fe?

Here you will find fuse box diagrams of Hyundai Santa Fe 2007, 2008, 2009, 2010, 2011 and 2012, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

What is the sports mode switch on a Hyundai Santa Fe?

KEY SOLENOID, SPORTS MODE SWITCH, SEMIACTIVE SOLENOID (GASOLINE) INSTRUMENT CLUSTER, LUGGAGE LAMP, MAP LAMP, REAR PERSONAL LAMP WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

Why is my Radio not working on my 2002 Ford Escape?

Re my 2002 Ford Escape, no radio, power locks not working after jump start, Have found the solution from some posts. It was a blown mini 10 ampsFuse, a fuse by itself behind a relay. I think it was #27. ?????

Why does my Ford Expedition radio not work?

I am having the same issue with my 2003 Ford expedition and the radio is not working and the power windows do not work also I continuously here a clicking sound that sounds like the door are locking or unlocking but it is not actually locking or unlocking would replacing the fuse fix my issues 42 people found this helpful.

Where are the low beams on a 2011 Hyundai Santa Fe limited?

I found out that there is actually a headlight relay under the driver’s side dash that, when it is bad, will cause there to be three highs at the headlights. You can find it between the side of the car and where the hood latch is located. I have the identical problem on my son’s 2011 Hyundai Santa Fe Limited. Low beams suddenly stopped working.

What are the wires in a Hyundai headlight?

Checked all relays & fuses, everything checks good, bulbs are good. The electrical connector into the headlight housing has 6 wires. When you look at the connector on LEFT side from top to bottom – Orange, White wires, MIDDLE Black and Black, Right – Red and Green.

Why are the headlights not working on my Hyundai?

After looking over the schemetic a few time and taking some readings at the headlights I figured that the dimmer switch was not passing a ground when in lowbeam position. When in highbeam I had 2 hots and a ground, when in low I had 3 hots not good. Hope that if anyone else has a simular problem this helps. Did you buy the car like that?

Where is the OBD plug on a Hyundai Santa Fe 2?

OBD connector location for Hyundai Santa Fe 2 (2006 – 2012) You will find below several pictures which will help you find your OBD connector in your car. Connector is under steering wheel near pedals. Go to the OBD2. scanner for HYUNDAI. OBD Connector is above the brake pedals. Those pictures were sent by Fabrizio.

The fuse box is located in the engine compartment (left-side). Inside the fuse/relay panel covers, you can find the label describing fuse/relay name and capacity.

Which is the fourth generation Hyundai Santa Fe?

Fuse Box Diagram Hyundai Santa Fe (TM; 2019-..) In this article, we consider the fourth-generation Hyundai Santa Fe (TM), available from 2019 to the present.

What kind of engine does a Hyundai Santa Fe have?

The different trim levels of this model come with various engine options based upon the geographical market. It has 1.5 L 4G15 I4, 1.5 L 15S4G I4, 2.0 L 4G94 I4, 2.4 L Theta II I4 174 hp, 2.7 L Mu V6 185 hp, 3.3 L Lambda V6 242 hp, 3.5 L Lambda II V6 276 hp petrol engines that are capable of providing optimal fuel economy.

How to fix a 2013 Hyundai Santa Fe?

2013 Hyundai Santa Fe Sport 2.4L 4 Cyl. Replace the front turn signal If your blinker doesn’t blink, or blinks rapidly, you likely have a burnt out bulb 2013 Hyundai Santa Fe Sport 2.4L 4 Cyl. Plug the oil leak If you are leaking oil and parking on your oil spots each night, the oil is breaking down your tires’ rubber

What’s the difference between a Santa Fe and a GLS?

The Limited’s sunroof and audio system are optional on the GLS and SE, as are heated front seats (SE only) and a navigation system with rearview camera. The 2010 Hyundai Santa Fe gets two new engines and six-speed transmissions that deliver both better performance and improved fuel economy.

What kind of engine does the Hyundai Santa Fe have?

Finally, the third-row seat option has been dropped. The 2010 Hyundai Santa Fe GLS and Limited come standard with a 2.4-liter four-cylinder that puts out 175 hp and 169 pound-feet of torque. A new six-speed manual transmission is standard in the GLS, while a new six-speed automatic is optional and standard with the Limited.

What are the safety features on a Hyundai Santa Fe?

Electronic stability control, antilock disc brakes, active front head restraints, side-impact airbags for front seat passengers and rollover-sensing side curtain airbags are all standard on the Santa Fe. In government crash testing, the 2010 Hyundai Santa Fe earned perfect five-star ratings in both frontal and side impacts.

What are the components of a Hyundai Santa Fe?

Variable Intake Solenoid (VIS) Valve 23. Fuel Pressure Regulator Valve 24. Canister Close Valve (CCV) 25. Ignition Coil 26. Main Relay 27. Fuel Pump Relay 28. Data Link Connector (DLC) [16-Pin] 29. Multi-Purpose Check Connector [20-Pin] 1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3.

How to remove battery from Hyundai Santa Fe?

Open the tailgate. 2. Find the plastic hex bolt cover and remove the cover with coin or flathead Removal 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead.

What does the ignition failure sensor do on a Santa Fe?

General Description. Ignition failure sensor is used to check whether the spark ignition is occurred correctly or not and also used to tachometer drive. The sensor monitors the voltage difference between a resistance which is on the battery circuit for ignition coil.

Where is the fuse on the brake light?

You will get the fuse panel under the dashboard and the PDC under the hood. The brake light switch is also to be found under the dashboard and check if its plunger touches the brake pedal arm. Any problem with the fuse box and light switch will affect the brake lights. In case if the fuse is blown, change it with a new one.

Where are the brake lights and tail lights?

In most European cars, the same bulb does the job of the tail and brake lighting. However, it has double filaments, allowing one set still working while the other set is burnt. You have to find the fuse box or the power distribution center (PDC). You will get the fuse panel under the dashboard and the PDC under the hood.

What makes up the fuse box on a Hyundai Santa Fe?

ABS CONTROL MODULE, ESC CONTROL MODULE, YAW RATE SENSOR, AWD ECM, STOP LAMP SWITCH (GASOLINE), MULTIPURPOSE CHECK CONNECTOR A/C CONTROL MODULE, INCAR & HUMIDITY SENSOR, HIGH BLOWER RELAY, REAR A/CON SWITCH, ICM RELAY BOX, AQS SENSOR, SUNROOF MOTOR, BLOWER BELAY, ELECTRO CHROMIC MIRROR

What causes brake lights to not work but tail lights do?

5 Causes of Brake Lights Don’t Work But Tail Lights Do 1 Bad Light Bulbs 2 Bad Brake Light Switch 3 Broken fuse or fuse box 4 Bad sockets and connectors 5 Broken wire More

How much is a Hyundai Santa Fe tail light assembly?

Shop AutoZone for Hyundai Santa Fe Tail Light Assembly. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Boasting a strong, powerful engine and an impressively spacious interior, your Hyundai Santa Fe delivers, whether on pavement or a dusty back road.

What are the problems with a 2005 Hyundai Santa Fe?

Worst 2005 Hyundai Santa Fe Problems #1: Paint Is Easily Damaged 2005 Santa Fe Average Cost to Fix: N/A #2: Abs, Traction Control Lights Come On 2005 Santa Fe Average Cost to Fix: N/A #3: Coil Spring Broken 2005 Santa Fe Average Cost to Fix: $600

What is the DTC code for a Hyundai?

In this article, you will find a complete list of Hyundai Trouble Codes. This list contains more than the Hyundai Check Engine Codes. Here you will find Hyundai ABS, Airbag, and Transmission DTC codes. P0244 Turbocharger/Supercharger Wastegate Sol.

What is the fault code for the Hyundai Elantra?

Hyundai Sonata, Excel 90 on , Scoupe 91 & 92 , Elantra. Hyundai Scoupe 93 through 95 and Accent vehicles. 4155 ECM failure A/C relay, IAC, PC.” You will need a Hyundai multi-system OBD-2 scanner to read Hyundai specific fault codes.

Why do I have a power relay code p0885?

If there is not an acceptable TCM power relay control voltage signal (battery voltage), a code P0885 will be stored and a malfunction indicator lamp may be illuminated, The TCM will also enter limp-in mode, on some models, if a code of this type is stored. What are the common causes of code P0885 ? What are the symptoms of code P0885 ?

What is the trouble code on a Hyundai Santa Fe?

P0420 is a very common trouble code. This code number references a number that is given to you when you plug your Hyundai Santa Fe into a OBDII scanner. It doesn’t matter which model you have, this OBDII code has the same meaning for all of them (1996+)

What’s the problem with Hyundai Santa Fe P0420?

It covers Hyundai Santa Fe P0420 meaning, symptoms, causes, and possible solutions. WIth the Santa Fe, OBDII P0420 is often caused by a bad oxygen sensor, but there can be other causes as well. Jumping straight to replacing the O2 sensor can cost you time and money. P0420 is a very common trouble code.

Where are the fuses on a Hyundai Tiburon?

Click to expand… remove the BCM & fuse panel cover directly in front of your left knee, then get down and look towards the top left side of the BCM and you will see the yellow fuse cover. pull it out and flip the top up to access the fuse itself. (the yellow cover doesnt come out all the way).

What should I do if my car fuse keeps blowing?

The important thing is to understand what is causing the fuse to keep blowing. The simple fix is often replacing the blown fuse and test the car again. If the fuse does not blow, it might be an easy fix because there was a power surge in the system.

& Door Warning Switch, Security Indicator Instrument Cluster (High Beam IND.) License Lamp, Rear Combination Lamp (In) LH, Rear Combination Lamp (Out) LH, Head Lamp LH Multipurpose Check Connector (G6DC), AWD ECM, ESC Control Module, Yaw Rate Sensor, Stop Lamp Switch (G6DC)

What to do if your Hyundai Santa Fe heater stops working?

If the heater has stopped working in your Santa Fe, this process has failed in one way or another. A word of caution: If there is no coolant in your overflow, you can refill it by adding more to the overflow reservoir.

Where are the fuses on a Hyundai Elantra?

Inside the fuse/relay box covers, you can find the fuse/relay label describing fuse/relay name and capacity. Not all fuse panel descriptions in this manual may be applicable to your vehicle. It is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label.

Why is the thermostat on my Santa Fe not working?

The job of your Santa Fe’s thermostat is to regulate the temperature of the engine. It does this by allowing water to enter the engine when it is getting hot, and by keeping coolant from entering while the vehicle warms up. Sometimes when a thermostat goes bad, it stays stuck open. This allows the coolant to continuously enter the engine.

When did the Hyundai Santa Fe Sport come out?

Hyundai Santa Fe Sport (DM/NC) was produced from 2015 to 2018. Here you will find fuse box diagrams of Hyundai Santa Fe Sport 2015, 2016, 2017 and 2018, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Where are the fuses on a Hyundai Santa Fe?

Cigar lighter (power outlet) fuses in the Hyundai Santa Fe Sport are located in the Instrument panel fuse box (see fuse “C/LIGHTER” (Front Power Outlet & Cigarette Lighter, Luggage Power Outlet)) and in the Engine compartment fuse box (fuse “P/OUTLET” (Power Outlet Relay)).

Where is the blower motor on a Hyundai Santa Fe?

Listen for the blower motor while adjusting the controls. Get to the blower motor in your Hyundai Santa Fe by first disabling the airbags. Unscrew the glove box and remove it. Unscrew and remove the blower motor wire harness found directly behind the blower motor. Unscrew three screws holding the blower motor into place and then remove the motor.

What are the problems with the Hyundai Santa Fe compressor?

1 The compressor clutch stops moving 2 The compressor produces loud noises when it is running 3 The cabin temperature rises (you will feel that something’s not right)

Why is my Hyundai Santa Fe AC not working?

Learn if it’s a simple fix or time to seek out a trusted technician. Not your vehicle? Why Isn’t My A/C Working? What are common reasons my Hyundai Santa Fe has air conditioning problems?

Fuse Box Diagram Hyundai Santa Fe (TM; 2019-..) In this article, we consider the fourth-generation Hyundai Santa Fe (TM), available from 2019 to the present.

Navigation