How many quarts of oil go in a 22R?
Engine Oil
| Viscosity: | 10W-30, 10W-40, 10W-50 (Above -23) 20 (-12 To 16) 20W-40, 20W-50 (Above -12) 30 (Above 4) 5W-30 (Below 10) |
|---|---|
| Capacity: | 4.9 quarts (with filter)After refill check oil level. |
| Torque: | 26-32 ft/lbs (Oil Drain Plug) |
What kind of oil does a 1989 Toyota pickup take?
Pour 4.5 quarts of 10W-40 oil into the engine.
How many quarts of oil does a 1989 Toyota pickup take?
4.5 quarts
Capacity: 4.5 quarts (with filter)After refill check oil level.
When did the Toyota 22R engine come out?
In 1985, the 22R engine was redesigned, many parts from the newer 22R (such as cylinder head, block, pistons, the timing chain, and cover, water and oil pumps) are not compatible with those from the older pre-1985 engine.
What kind of oil does a Toyota 22RE use?
For specs: As the manual says: anything meeting the SG spec or newer (SG, SH, etc to the current SN) and having the “energy conserving” rating. However newer spec means less zinc and phosphorous for emissions (they contribute to O2 sensor and catalyst degredation so to have a 100k+ mile emissions warranty, you need cleaner oil too).
What kind of carburetor does Toyota 22R have?
Cylinder bore and piston stroke are 92.0 mm (3.62 in) and 89.0 mm (3.5 in), respectively. The Toyota 22R engine has a carburetor fuel system and ignition system with a mechanical distributor. In 1983, Toyota swapped the dual-row timing chain used in older 22R engines for a single-row chain with plastic guides.
What kind of compression ratio does Toyota 22R have?
The Toyota 22R has a cast-iron cylinder block with five bearing support system. It has a 92.0 mm (3.62 in) cylinder bore and 89.0 mm (3.5 in) piston stroke. Compression ratio rating is 9.0:1. After securing bearing cap bolts, make sure crankshaft turns smoothly by hand.
For specs: As the manual says: anything meeting the SG spec or newer (SG, SH, etc to the current SN) and having the “energy conserving” rating. However newer spec means less zinc and phosphorous for emissions (they contribute to O2 sensor and catalyst degredation so to have a 100k+ mile emissions warranty, you need cleaner oil too).
In 1985, the 22R engine was redesigned, many parts from the newer 22R (such as cylinder head, block, pistons, the timing chain, and cover, water and oil pumps) are not compatible with those from the older pre-1985 engine.
What kind of fuel injection does a Toyota 22R-E have?
The Toyota 22R-E engine has an electronic fuel injection (EFI) system and ignition system with a mechanical distributor. In 1985, the 22R engine was redesigned, many parts from the newer 22R-E (such as cylinder head, block, pistons, the timing chain, and cover, water and oil pumps) are not compatible with those from the older pre-1985 engine.
Cylinder bore and piston stroke are 92.0 mm (3.62 in) and 89.0 mm (3.5 in), respectively. The Toyota 22R engine has a carburetor fuel system and ignition system with a mechanical distributor. In 1983, Toyota swapped the dual-row timing chain used in older 22R engines for a single-row chain with plastic guides.