What does a tip over sensor do?
Tip over sensor cuts ECM controls of injectors, coils and fuel pump. It should not do this until bike is leaned more than… uh… some amount of degrees towards the mother earth.
How do you test a tip over switch?
the only way to test it is to either knock it over with a multimeter on it, or remove it so you can manipulate the switching mechanism. otherwise you won’t see a change.
How does a heater tip over switch work?
Mechanical Tilt & Tip Over Switches Mechanical Tip Over switches sense tilt over 360° of the vertical axis. If the heater is tilted more than a specified angle, the Tip Over switch is used to switch off the heater.
What element substance is used in a tilt or mercury switch?
Mercury tilt switch (position sensor) is a glass container (tube) with two or more electrodes containing mercury (Hg). Mercury, one of only two liquid elements, forms the liquid conductor. The rest of the flask is filled with air, inert gas or vacuum.
How does a tilt sensor work?
Working Principle A tilt sensor has a metallic ball that is designed to move the two pins of the instrument from the ‘on’ to the ‘off’ position, and vice versa, if the sensor reaches a pre-determined angle. Tilt sensors are the environment-friendly version of a mercury-switch.
Who is the owner of KTM Motor Company?
KTM AG is a transnational corporation, a manufacturer of motorcycles, bicycles and sports cars, headquartered in Matingofen, Austria. The company was formed in 1992 from the company founded by Hans Trankenpolz in 1943, KTM Motor-Fahrzeugbau KG. In 1992, the latter declared bankruptcy and split into four independent companies:
How much does a KTM oil change kit cost?
KTM Complete Oil Change Kit 690 Duke/Enduro/SMC 2012-2019 19 reviews $95.99 $115.39 KTM Handlebar End Mirror Duke/Enduro R/SMC R/SD GT/R 2014-2021 24 reviews $103.99
Why does KTM twins have so much traffic?
Due to the current global pandemic crisis, KTM Twins has seen a large increase in Internet traffic through our website, and is experiencing a large increase in customer tickets, phone volume and shipping delays. This has also resulted in longer than normal delays in inquiry response.
How many horsepower does a KTM 790 have?
790 and 890 out enjoying the day. What a day it was. Good times. . . #ktm890adventure #ktm790adventure #adventure #explore #motorcycle #dirtbikesarefun
What does the blink code mean on a KTM 690?
If any sensors go outside limits you will get a flashing FI light and the KTM operators manual will be able to interpret the blink code which is kind of like morse code from the FI light blinking so many long and short blinks. If you have a mechanical fault, a sensor reading incorrectly or an incorrectly adjusted sensor there will be no warning.
Where is the air temperature sensor on a KTM 690?
Intake Air Temperature Sensor – Located inside the airbox it trims fuel mixture dependent on intake temperature. Can be damaged by oil contamination. Connector wires are quite often damaged during airbox removal. NTC thermistor resistance varies with Temp -20ºC (18.8K) and +40ºC (1.136 K).
Is the KTM 690 EFI 2008-2013 a free program?
The guide is directly written for KTM 690 2008-2013 year models as these have the two ECU configuration and the ECUs can be accessed using the free program TuneECU. 2014 and newer models have a single ECU and TuneECU cannot yet access these ECUs. Much of the sensor information and preventative measures are however still valid for the later models.
What causes a KTM 690 EFI to stop?
The rear filler design and the minute fuel injector nozzle mean that crap can get in and stop the bike. In normal use the pump attracts a grey residue from the fuel tank material that will eventually block filters. Also the plumbing of the pump can get kinked lines and electrical connectors can work loose.