How much oil goes in M109R?
It takes 10w40 oil and 3.2 qts for oil change only and 3.6 qts for oil and filter change.
What kind of oil does a Suzuki M109R take?
Suzuki recommends the use of SAE 10W-40 engine oil.
How do you change the oil on a 2006 Suzuki Boulevard C50?
Instructions
- Step 1: With a warm engine, remove the drain plug.
- Step 2: While the oil drains, remove the oil filler cap.
- Step 3: Remove the oil filter.
- Step 4: Set your torque wrench to 20 Nm.
- Step 5: Oil the new oil filter’s o-ring.
- Step 6: Install the new oil filter.
- Step 7: Install drain plug and pour in oil.
- Test your work.
What kind of oil does a 2008 Suzuki Boulevard C50 take?
Suzuki ECSTAR R9000 10W-40 Full Synthetic Oil Change Kit for Suzuki Boulevard C50 VL800 2005-2009.
When to check oil level on Suzuki M109r?
But according to Suzuki the motor is to be warmed up , from 3 to 5 mins before checking the oil level. I drained out ONE QUART to bring it the NOW PROPER level. Suzuki has noted this info against my bike incase there is ANY engine problems in the future.. So be warned!!!!! Click to expand… I’m picking up my bike today!!!!!
What kind of engine does the Suzuki M109r have?
Like the Hayabusa from the same stable, the Suzuki M109R is known as being fast in the cruiser world. The low-down of the M109R is that it has A 1783cc (109 cubic inch) dual overhead cam 52 degree V-twin engine (a cruiser engine but it needs valve clearance checks)
What kind of suspension does a boulevard M109r have?
Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Suzuki Boulevard M109R have a High-tensile double cradle steel frame with front suspension being Telescopic, coil spring, oil damped and in the rear suspension it is equiped with Link type, coil spring, oil damped .
What should oil level be on Suzuki motorcycle?
The oil level should be at the notch on the dipstick. If it is lower than the notch, you will need to add more oil. Warm your motorcycle to operating temperature by starting the motor and letting the oil warm up, or by taking a short ride. The oil will expand slightly and flow better to give you a more accurate reading.
What kind of oil does a Suzuki M109r use?
SAE 10W-40 Engine oil, API SF/SG or SH/SJ with JASO MA (which are standard ratings for most oils). Don’t over-torque the bolt (spec is 23 Nm/16.5 lb-ft for the oil drain bolt per the manual) — use a torque wrench if you don’t have experience with how much torque is enough. Needs to be changed every time you change the oil.
How often should I Check my M109r oil level?
I have had my M109R for two week now and have checked the oil level every other day, but this past Sat. I was riding in stop and go traffic and when I pull to a complete stop. When I turn the key off there was oil coming from the left air filter and making a puddle below the bike.
What kind of oil do I need for my Suzuki?
Dealers:Engine Oil must be ordered separately from all Parts and Accessories. See Suzuki Connect for instructions. oil filters and capacities Oil Capacity Models Filter Part Number w/out Filter L/QT w/Filter L/QT DF9.9/15 ‘96 – ‘10 16510-05240* 1.0/1.1 1.1/1.2 DF9.9T/9.9HT/15 ‘11 16510-45H10 1.0/1.1 1.1/1.2
Which is the best spark plug for a Suzuki M109r?
NGK CR8EK or CR8EIX (recommended as the best spark plugs for the M109R — “runs like a bat out of hell”) Iridium. This is what the manual and mechanics suggest. Make sure it’s gapped correctly to 0.6-0.7mm (get a gapping tool) and torqued to 11 Nm/8 lb-ft.