How do you change a fuel pump on a 1995 Toyota Camry?
Be sure this procedure is done in a well ventilated area.
- Disconnect the negative battery cable.
- Relieve the fuel pressure.
- Remove the rear seat cushion.
- Remove the floor service hole cover.
- Disconnect the electrical fuel pump wiring at the fuel pump assembly. Check for any fuel leakage while in there.
Where is the fuel pump located on a 94 Toyota Camry?
If you need to replace the fuel pump in a Toyota Camry, the pump unit is located inside the fuel tank directly below the rear passenger seats. You need to remove the seats from inside the car. Once they are removed the pump is easily accessible by opening a covered hole right above the tank.
Where is the fuel pump on a Toyota Camry?
Without fuel, your Toyota Camry cannot run, and the fuel pump is instrumental in delivering fuel from the fuel tank to the engine. This part can wear out over time, which means it may need to be replaced. It is located under the rear passenger seats in the fuel tank. The seats will need to be removed in order to get to the pump.
What causes a Toyota Camry to not start?
CASE 1: If the fuel pressure gauge registered 0 PSI: This confirms that the cause of your 2.2L Toyota Camry no start problem is caused by a lack of fuel. Now, I usually take 2 more precautions, before condemning the fuel pump as bad:
What should the fuel pressure be on a Toyota Camry?
Check the fuel pressure gauge’s fitting (on the fuel filter) for fuel leaks. Your fuel pressure gauge should register about between 38-44 PSI fuel pressure if the fuel pump is OK.
How do you remove fuel filter from Toyota Camry?
Remove the fuel filter by removing the mounting screw. Remove the pump flange by prying up on the housing snap-retainers in the sequence shown. Disconnect the fuel pump electrical connector. Remove the upper bracket by prying on the snap-retainers in the sequence shown and separating the fuel pump from the housing. Figure 9.