Do I need plumbers putty for bathtub drain?
However, the most ideal solution to seal this area is using plumber’s putty. Using plumber’s putty works best for it creates a waterproof seal when used on wet surfaces. In case you find it challenging to reach the underside area of the tub drainage pipe, then your best option will be silicone caulking.
Do you need a trap on a bathtub drain?
Yes, you should always install a P-Trap as part of the plumbing of a bathtub or any other wastewater drain system. Failure to include a P-Trap could result in foul smells, harmful gases, and small animals entering through your tub’s drain.
What kind of pipe do you use for a tub drain?
Tub drain assemblies are commonly made from one of three different pipe materials: brass, ABS (acrylonitrile butadiene styrene) plastic, or PVC (polyvinyl chloride plastic). Tub drain assemblies can be joined with slip fittings (brass, ABS, or PVC), or with solvent-glued fittings (ABS or PVC only).
How tight should a tub drain be?
How to Tighten a Bath Drain
- Insert the ends of a pair of slip-joint pliers into different portions of the basket within the bath drain.
- Insert a thick screwdriver between the two ends of the pliers.
- Turn the pliers clockwise using the screwdriver. Turn until the bath drain is tight.
How tight do you tighten a tub drain?
Once the flange is carefully threaded into the first few threads of the drain elbow, use the Smart Dumbell to hand-tighten the flange into the drain elbow until tight. Then use your wrench to tighten, by one quarter of a turn. Do this carefully, so as not to squeeze the gasket underneath the tub out of place.
How Big Should bathtub drain pipe be?
1 1/2 inches
The proper size for both a bathtub drain and trap is 1 1/2 inches in diameter, regardless of the bathtub size. The type of trap used on a tub drain is a p-trap. Because they are the same size, the trap will glue directly onto the PVC drain pipe without the use of adaptors or fittings.
Are all tub drains the same?
Bathtub drains are 1 1/2 inches wide and fit all standard bathtubs ranging from 14 to 26 inches deep. They are this size because they must fit the opening of the P-trap — also 1 1/2 inches wide — which is a special pipe that has a sharp bend in it.
How do you install a bathtub drain?
Here’s how to install a bathtub drain: Unscrew the drain toggle. Unscrew the drain cover. Remove the drain extension, using heavy pliers if necessary. Locate the drain outlet that connects the bathtub drain to the sewer pipe. Remove the old drain pipe by unscrewing any couplings. Connect the new drain pipe to the outlet pipe.
How do you fix a tub drain?
Keeping a few items on hand allows you to fix the slow bathtub drain yourself with little work. Pour 1/2 cup baking soda into the drain, and follow up with 1 cup white vinegar. Let the ingredients combine and foam for five minutes; this deodorizes the drain and loosens mild blockage.
Does a bathtub require an overflow drain?
A bathtub does not have to have an overflow drain but a bathroom must have a mechanism to prevent flooding. Having a floor drain can be a practical alternative but insurance and building code considerations should be factored into your decision.
Why won’t my bathtub drain?
Here are a few of the scenarios that will cause a tub to refuse to drain: If you have a bathtub and shower combo, the built-in stopper that you use to block the flow of water out of the tub drain may have gotten stuck closed.