Why does my DVD player keep playing after power off?
If this is persisted after removing power from your DVD player, the player may simply have enough capacitance (stored electricity) to prevent its memory from being erased during short power-off cycles. If it is persisted over long power-off cycles, the DVD player must store that information in nonvolatile memory.
How to get a DVD player to play without power?
1 Turn off the DVD player. 2 Unplug the power cord of the DVD player from the AC outlet. 3 Let the DVD player remain without power for 1 minute. 4 Plug the power cord back into the AC outlet. 5 Turn on the DVD player.
What to do if your DVD player won’t eject?
Press the POWER, STOP and EJECT buttons simultaneously. Press the DISC1, STOP and EJECT buttons simultaneously. If you have RDR-GX330 DVD recorder, perform the easy setup to resolve this issue. If the issue still occurs after completing all of the troubleshooting steps above, repair may be required. Go to Product Repair.
How to troubleshoot the child lock on a DVD player?
Follow the steps below to troubleshoot this issue: 1 Make sure the child lock feature is disabled. 2 Try to open the disc tray. 3 If the issue still occurs, power off your DVD player. 4 Unplug the power cord for 30 seconds and then plug it back in. 5 Power on your device. 6 Try to open the disc tray.
What to do when your DVD drive is powered off?
try this, removed the drive from your laptop and uninstall the driver. reboot and power down. reinstall the drive and reboot. windows should detect and reinstall the drivers. if you are running any registry cleaners, don’t! This post has been reported. After shutting down last night and powering up this morning, all is well. Gotta love it. 😉
How to remove a DVD from a car DVD player?
1 Switch off the car ignition Many DVD players have a feature called Power Eject, which can be mentioned in some other names too. 2 Press Power button and eject button of the DVD player together By pressing these buttons together, the DVD player gets a command of taking the DVD out without 3 Perform again with a different technique
Why is my DVD drive not working properly?
The option to Power On the drive from MyComputer doesn’t do anything, either. I’m running on AC power- thought it might be a power settings issue, but can’t find anything on the power manager about it. Tried going to systems, hardware. The drive is listed there, and the status says the device is working properly.
How do you eject a stuck DVD player?
Step 3: Eject the stuck DVD by pressing the Eject Button on the DVD player and jiggle it. When you insert the DVD with the way as mentioned above, jiggle the DVD to give friction to the DVD inside the DVD player. By doing so, the DVD could get away from the thing that has stopped the DVD player from ejecting the DVD.