Menu

Navigation

How do you reset the ECU on a Mazda RX8?

Posted on by Arif Clayton

How do you reset the ECU on a Mazda RX8?

1. Turn ignition switch to “ON” position, but do not start engine. 2. Pump the brake pedal at least 20 times within 8 seconds after the ignition switch is turned ON.

How do you start a Mazda RX 8?

Starting Procedure

  1. With the ignition off, press the accelerator pedal to the floor and hold.
  2. Turn key to start the engine, keeping the pedal to the floor.
  3. If the engine starts, release pedal to avoid over-revving the engine.
  4. If the engine does not start, continue to hold key in the start position for 8 seconds.

When did the Mazda RX-8 come out?

This category covers 2004, 2005, 2006, 2007, 2008 Mazda RX-8 Troubleshooting models. Your guide to finding the problems with your Mazda RX-8 so you can effectively and efficiently resolve them.

How to troubleshoot a Mazda RX-8 engine problem?

The easiest way to solve this problem is by replacing the battery with a new one, please look at Battery Replacement Guide. The RX-8 engine runs very rich when it is first started, meaning as it warms up it it has a higher then normal amount of fuel in the engine.

What causes carbon deposit in Mazda RX-8?

The RX-8 has a rotary engine which requires apex and side seals to seal off the “combustion chambers” within the engine. As the car is driven these seals will eventually wear down, and carbon deposit is can form on the side of the engine causing leakage between the combustion chambers and changing engine geometry.

Where does the oil go in a Mazda RX-8?

For help rotating tires please check out the Tire Rotation Guide. Engine oil in the RX-8 lubricates the moving parts of the engine, but is also injected into the rotary compression chambers to provide lubrication for the apex seals. As you drive the car the oil picks up impurities in the engine and can lose some of its lubricating properties.

What are the problems with a Mazda RX-8?

A main problem with the engine is that the seals tend to blow out at about 100k miles, though I believe with proper care of the car, the engine should have more life. I have to say the most novel thing about the RX-8 is that the engine is a rotary engine.

Is the Mazda RX 8 a fun car to drive?

Has a rotary engine, with a race car feel and seats that hug your body as you drive. Love the sunroof that gives a openness while driving, very reliable car to get you to point a to point b. Much more roomy than when your just looking at it. The 6th speed is fun fun to drive.

How many miles does a 2004 Mazda RX8 have?

I’ve had my 2004 RX8 since 2008 & it now has 106632 miles on it. Other than brake, tires, & oil changes & now the third set of spark plugs since it was new. It has been a very good car.

Is the Mazdaspeed 6 a good car to buy?

Edmunds’ expert review of the Used 2006 Mazda Mazdaspeed 6 provides the latest look at trim-level features and specs, performance, safety, and comfort. At Edmunds we drive every car we review, performing road tests and competitor comparisons to help you find your perfect car. Read the full in-depth review of the Used 2006 Mazdaspeed 6 at Edmunds.

How do you reset the ECU on a Mazda rx8?

Posted on by Arif Clayton

How do you reset the ECU on a Mazda rx8?

1. Turn ignition switch to “ON” position, but do not start engine. 2. Pump the brake pedal at least 20 times within 8 seconds after the ignition switch is turned ON.

Are there any problems with the Mazda RX8 engine?

During 2004-2005, there were numerous reports of RX-8 engine failure. Soon, the reputation of the engines was beginning to take shape. It was basically an engine that could only last for many owners up to 30,000 miles. Many Mazda owners were experiencing issues such as power loss.

What causes carbon deposit in Mazda RX-8?

The RX-8 has a rotary engine which requires apex and side seals to seal off the “combustion chambers” within the engine. As the car is driven these seals will eventually wear down, and carbon deposit is can form on the side of the engine causing leakage between the combustion chambers and changing engine geometry.

What does the PCM do on a Mazda?

by Ashley Hay. The powertrain control module (PCM), or engine control unit (ECU), is a circuit board computer that stores information pertaining to different areas of your Mazda’s engine. If your Mazda’s check engine light or another malfunction indicator light illuminates, it is because of a signal the PCM received.

How do you warm up a Mazda RX8 engine?

You need to warm up the engine slowly, stay in low revs depending on outside temperature for at least 20 minutes. Beware you need to warm up the oil, and the gauge on your dash is the water temperature, which heats up a lot faster! After that, drive it like you stole it.

How to troubleshoot a Mazda RX-8 engine problem?

The easiest way to solve this problem is by replacing the battery with a new one, please look at Battery Replacement Guide. The RX-8 engine runs very rich when it is first started, meaning as it warms up it it has a higher then normal amount of fuel in the engine.

by Ashley Hay. The powertrain control module (PCM), or engine control unit (ECU), is a circuit board computer that stores information pertaining to different areas of your Mazda’s engine. If your Mazda’s check engine light or another malfunction indicator light illuminates, it is because of a signal the PCM received.

The RX-8 has a rotary engine which requires apex and side seals to seal off the “combustion chambers” within the engine. As the car is driven these seals will eventually wear down, and carbon deposit is can form on the side of the engine causing leakage between the combustion chambers and changing engine geometry.

When did the Mazda RX-8 come out?

This category covers 2004, 2005, 2006, 2007, 2008 Mazda RX-8 Troubleshooting models. Your guide to finding the problems with your Mazda RX-8 so you can effectively and efficiently resolve them.