How do I Turn Off the maintenance light on my car?
Turn the key to the second ignition position (labeled “II”). After 10 to 15 seconds, the maintenance light will flash, and then disappear. Release the buttons and turn the key off.
How to reset maintenance required light on a Toyota Tundra?
Continue holding the trip odometer knob while the “—-” symbol flashes on the odometer. Release the trip odometer knob when “Trip A” is displayed again. Turn your ignition off, and then turn it back on. The “Maintenance Required” light will be reset. Tundra Solutions: DIY Oil Change and Light Reset.
How to turn off maintenance light on Toyota Corolla?
In this case, you’ll need to take these steps to turn the maintenance light off: Insert the key and turn it to the “On” position, but don’t start the engine. This may also be marked as “II” on the ignition. If you have a push-button ignition, press the button twice with your foot off the brake. Select the cog icon on the multi-information display.
How do you turn off maintenance light on Acura TL?
Turn the key to the second ignition position (labeled “II”). After 10 to 15 seconds, the maintenance light will flash, and then disappear. Release the buttons and turn the key off. This procedure works on all second-generation Acura TL models (2000 to 2003).
How to turn off the maintenance required light?
The maintenance required light should begin flashing on your dashboard. Continue to keep the button pressed until the light goes away from your dashboard. Pressing the reset button for more than 20 seconds is necessary for this technique to be successful.
How to reset the Toyota maintenance required light?
Turn the Vehicle Off and Press the Trip Meter Reset Button Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. Hold this button for a while. For some models, this is the button used to switch from the odometer reading to the other two trip meters. 3.
How to reset Toyota Highlander service maintenance indicator?
2008-2013 Highlander Maintenance Required Soon Reset STEP 1. Turn the Ignition ON. Don’t start the Engine. STEP 2. Press the ODO/TRIP BUTTON to display to TRIP A. STEP 3. Press and hold ODO/TRIP BUTTON and turn ignition to the “RUN” position. Hold knob for at least 5 seconds until “RESETTING MAINTENANCE DATA COMPLETED” is displayed. STEP 4
How to reset service light indicator on Mazda CX-5?
MAZDA CX-5 WRENCH SERVICE LIGHT INDICATOR RESET FOR TYPE A AUDIO MODEL. Press and hold the TRIP BUTTON with the ignition switched off, then switch it on. Keep pressing the selector for more than 5 seconds.