Can you put transmission fluid in a 2012 Nissan Altima?
Yes, it is a little tricky ,use a small screw driver to unlock the cap of the dipstick pipe and fill the transmission through that same pipe. Make sure you use the NISSAN CVT FLUID NS-2 only. Good luck.
How do you check the transmission fluid on a 2012 Nissan Altima?
How To Check Your Transmission Fluid Levels
- Start your car’s engine and let it run for a few moments.
- Find the transmission fluid dipstick.
- Remove the dipstick and touch the fluid, moving it around between your thumb and forefinger.
- Use a rag to wipe off the dipstick.
What kind of transmission fluid does my 2012 Nissan Altima take?
Valvoline Synthetic CVT Fluid CVT 1 Quart.
Where does CVT fluid go in Nissan Altima?
• Radiator (2) • CVT fluid cooler hose [inlet side (3)] • Transaxle assembly (4) 2. Drain CVT fluid from CVT fluid cooler hose [outlet side (1)] and refill with new specified NISSAN CVT fluid in the CVT fluid charging pipe with the engine running at idle speed.
Can you use CVT fluid on a Nissan NS-2?
CAUTION: • Use only Genuine NISSAN CVT Fluid NS-2. Never mix with other fluid. • Using CVT fluid other than Genuine NISSAN CVT Fluid NS-2 will deteriorate in driveability and CVT durability, and may damage the CVT, which is not covered by the warranty.
Is there a better way to change CVT fluid?
There has to be another better and recommended way to change the CVT fluid. The fluid was for sure dirty and had friction material in it. There was a noticeable difference from the old to new fluid color.
Why is there no drain plug on my Altima?
I wanted to update everyone and let you all know I completed the drain and re-fill on my 2011 Altima. Per the Nissan Dealership I dropped the transmission oil pan because there is no drain plug on the pan. The drain plugs sits high up on the left side of the transmission way above the pan preventing you from getting adequate fluid out.
• Radiator (2) • CVT fluid cooler hose [inlet side (3)] • Transaxle assembly (4) 2. Drain CVT fluid from CVT fluid cooler hose [outlet side (1)] and refill with new specified NISSAN CVT fluid in the CVT fluid charging pipe with the engine running at idle speed.
How do you check the CVT fluid level?
With engine at idle, while depressing brake pedal, move shift selector throughout the entire shift range. 6. Pull out the CVT fluid level gauge from the CVT fluid charging pipe after pressing the tab on the CVT fluid level gauge to release the lock.
CAUTION: • Use only Genuine NISSAN CVT Fluid NS-2. Never mix with other fluid. • Using CVT fluid other than Genuine NISSAN CVT Fluid NS-2 will deteriorate in driveability and CVT durability, and may damage the CVT, which is not covered by the warranty.
How long does it take CVT fluid to warm up?
When ambient temperature is 20°C (68°F), it takes about 10 minutes for the CVT fluid to warm up to 50° to 80°C (122° to 176°F). 3. Park the vehicle on a level surface. 4. Apply parking brake firmly.