Where is the TPMS reset button on a Hyundai Tucson?
Depress the TPMS reset button located below the steering wheel until it blinks three times. Turn the ignition off and remove the key. Start the engine and let it run for 20 minutes while the system records the new pressure of each tire.
How do you reset the TYRE pressure light on a Hyundai Tucson?
Hold the tire pressure monitor reset button until the TPMS light blinks three times, then release it. Start the car and allow 20 minutes to pass for the sensor to refresh. The TPMS reset button is usually located under the steering wheel.
What should the tire pressure be on a Hyundai Tucson?
35 PSI
Hyundai Tucson Tire Pressure: 35 PSI.
What is the correct tire pressure for a Hyundai Tucson?
How to reset low tire pressure light on Hyundai Tucson?
The Low Tire Pressure LCD position indicator will remain on and the TPMS Malfunction Indicator may blink for one minute and then remain illuminated until you have the low pressure tire repaired and replaced on the vehicle. There is no option to reset low tire pressure on Hyundai Tucson.
When does the low tire pressure light come on?
When the system detects that one or more of the tires’ air pressure is low, the tire pressure indicator will come on and the display will indicate which tire or tires need more air pressure.
How does the TPMS work on a Hyundai?
Hi‐line systems show the driver individual tire positions and air pressures of all tires. Lo‐line systems do not show individual tire positions and only alter that one of the 4 tires is under inflated. Some models switched systems mid‐year, so be aware of the type of TPMS you are servicing.
How do you check tire pressure on a Hyundai?
Remove the valve cap of the tire that was indicated as being low on air. Press the end of the pressure gauge into the nozzle to measure the current air pressure. Press the end of the compressed air hose into the valve for a few seconds to add air to the tire. Check the pressure again with the gauge.
The Low Tire Pressure LCD position indicator will remain on and the TPMS Malfunction Indicator may blink for one minute and then remain illuminated until you have the low pressure tire repaired and replaced on the vehicle. There is no option to reset low tire pressure on Hyundai Tucson.
Why is the tire pressure light not working?
1. Measuring Tool Not Functioning While every time you start the car and the pressure light turns on and stays lighted, this means the TPMS is not functioning properly. However, before consulting the mechanic regarding this issue, do check the tire pressure. If the tire pressure is fine, the TPMS needs to be repaired. 2. Extreme Cold Weather
Hi‐line systems show the driver individual tire positions and air pressures of all tires. Lo‐line systems do not show individual tire positions and only alter that one of the 4 tires is under inflated. Some models switched systems mid‐year, so be aware of the type of TPMS you are servicing.
What does the tire pressure sensor on a Hyundai Sonata do?
The tire pressure sensor in Your Hyundai Sonata does pretty much exactly what it says, it monitors the pressure in Your tires and lets You know if one or more of them are not properly inflated. When one of these sensors trips due to low pressure it shows a warning light on the dash.