How do you measure Trailer dust caps?
You can measure either the outer diameter of the part of the dust cap that fits into the hub OR the inner diameter of the hub where the dust cap goes using calipers such as # PTW80157. Calipers are needed because the measurement has to be as accurate as possible.
How much does 7000 pound axle weigh?
Specs: 7,000 lbs Dexter Trailer Axle (7K Capacity) Tube: 3″ Weight: 232 lbs.
Are dust caps standard size?
Most valve caps are one-size-fits-all, meaning you don’t have to hunt down a special dust cap for your particular car. If you want to be doubly sure, just confer with your car manufacturer or local garage.
What size are dust caps?
Some of the most common sizes are 1.980 inch, 1.986 inch, 2.441 inch and 2.717 inch. As you can see the sizes can differ by very small amounts.
How much weight can 2 7000 pound axles hold?
14,000 lbs.
So, if you had two axles rated for 7,000 lbs then your trailer’s GVWR will be rated at 14,000 lbs. GAWR- Gross Axle Weight Rating. The total amount of weight you can put on each trailer axle, determined by the manufacturer.
What is the difference between 7k and 8k axles?
Typically a Dexter 7k axle will have a diameter of 3 inches and an 8k axle will have a diameter of 3-1/2 inches. The thicker the axle the more weight it can handle. There really isn’t an advantage to going with higher capacity leaf springs than needed.
Should I fill dust cap grease?
Grease caps protect your wheel bearings from the dirt, dust, sand, water, salt and road grime that can (and will) destroy bearings. That’s why it’s important to not only pack the bearings with grease but to also completely fill the caps with grease.
Will a tire deflate without a cap?
While a missing valve stem cap may seem harmless, it can lead to loss of air pressure. Without a cap, dirt and debris will enter the valve stem where it can break through the seal. When this occurs, air will leak out of the tire through the valve stem.