How do you turn off the check tire pressure light on a 2012 Honda Civic?

How do you turn off the check tire pressure light on a 2012 Honda Civic?

Models with steering wheel buttons:

  1. Press MENU.
  2. Select Customize Settings.
  3. Select TPMS Calibration.
  4. Select Initialize.
  5. Select Yes.
  6. Press MENU to exit.

What should the tire pressure be on a 2012 Honda Civic?

2012 Honda Civic LX

Front Tire Rear Tire
Recommended Tire Pressure 32 psi 32 psi
Acceptable Winter Tire Pressure ⓘ 35 – 37 psi 35 – 37 psi
Tire Size Type P-Metric
Tire Load Index (Maximum Tire Load Capacity) 89 (1279 lbs or 580 kg)

How do you check the tire pressure on a Honda Civic 2021?

  1. Monitors the tire pressure while you are driving.
  2. Press and hold the TPMS button until the low tire pressure indicator blinks twice, indicating the calibration process has begun.
  3. Use the steering wheel buttons to make and enter selections in the Driver Information Interface (see page 29).

When does tire pressure light go out on Honda Civic?

When the calibration successfully begins, the TPMS light on the dash blinks twice. Drive the car 26 MPH or faster in a straight line and verify the light goes out. The tire pressure monitoring systems (TPMS) on some newer Honda cars have reverted to the old-style TPMS called indirect TPMS.

Where is the tire pressure sensor on a Honda Civic?

If your vehicle has information display, so you need just to follow first four points and then locate and press the “ TPMS button “. Then just wait the TPMS or low tire pressure light blinks twice. Completely stop your vehicle. Check the tire pressure. Choose the specific pressure level. The specified tire pressure is located on the door panel.

Where is the TPMS light on a Honda Civic?

Press and hold the TPMS switch on the dash to the left of the steering wheel for 3 seconds. When the calibration successfully begins, the TPMS light on the dash blinks twice. Drive the car 26 MPH or faster in a straight line and verify the light goes out. Image courtesy of American Honda Motor Corp.

How to fix TPMS warning light on Honda CRV?

There is a widely reported solution: tell your Honda-certified mechanic about your problem and ask them to perform the software upgrade outlined in TSB #14-006. We are looking for a copy of this document, but from all accounts it a simple software upgrade that fixes many TPMS problems: Got the CRV back from the TSB 14-006 software upgrade.

When the calibration successfully begins, the TPMS light on the dash blinks twice. Drive the car 26 MPH or faster in a straight line and verify the light goes out. The tire pressure monitoring systems (TPMS) on some newer Honda cars have reverted to the old-style TPMS called indirect TPMS.

Press and hold the TPMS switch on the dash to the left of the steering wheel for 3 seconds. When the calibration successfully begins, the TPMS light on the dash blinks twice. Drive the car 26 MPH or faster in a straight line and verify the light goes out. Image courtesy of American Honda Motor Corp.

There is a widely reported solution: tell your Honda-certified mechanic about your problem and ask them to perform the software upgrade outlined in TSB #14-006. We are looking for a copy of this document, but from all accounts it a simple software upgrade that fixes many TPMS problems: Got the CRV back from the TSB 14-006 software upgrade.

Is the tire pressure reset light still on?

The TPMS light can become The Little Boy Who Cried Wolf. The light is on, you set the tire pressure, and the TPMS light is still on. Arrggh! A strategically located piece of electrical tape can solve the problem, or better yet a picture of your favorite deity will no doubt benefit from a warm orange glow shining through.