Can I clean my EGR valve myself?
To clean the valve, wear an acid-resistant pair of gloves. Put on safety glasses, too, as the carbon deposits could become airborne in the process. Spray the EGR valve cleaner onto the carbon deposits. Remove the carbon buildup with the use of a pipe cleaning brush and dull scraper.
Where is the EGR valve on a 96 Toyota Camry?
It is simple. It looks like a little flying saucer or pancake and it is in the rear of the engine on top near windshield. There are two hoses that plug into it from the exhaust, and one coming out, and one on bottom (total of 4). You can just unplug the hoses and replace them easily.
How to clean the EGR valve on a Toyota?
2. Now you can see the EGR Valve, you will need a 12mm socket, Ratchet and extension to remove this. 3. Remove these 2 x bolts 1st for the pipe above the EGR valve. 4. Now undo the other 4 x 12mm nuts and bolts from the EGR valve and unplug this from the wiring loom, this can now be removed.
Where is the EGR valve on a Toyota Camry?
The EGR valve is near the throttle body. If you follow the intake towards the engine, you’ll soon spot the EGR. Figure 1. Location of your Camry’s EGR Valve. Before taking off the valve, label the necessary hoses so you know how to reconnect them in a few minutes.
How do you clean the exhaust valve on a Toyota Camry?
Label your hoses for future reference. Once you remove the valve, take a screwdriver, a wire brush, or some other kind of scraper and clean out all the gunk as well as carbon inside the valve. Exhaust gasses will cake the inside of the valve, and with the heat of the gasses, it hardens into a very solid layer of crud.
How much does it cost to replace a valve on a Toyota Camry?
If you need to replace the valve, take off the old valve and then install a new EGR valve. You just removed the original one five minutes ago, so this should be pretty easy by now. A brand new EGR valve from Toyota will cost you around $60.