What oil does my 2014 Subaru Crosstrek take?
Shop 2014 Subaru Crosstrek Oil 0W20 Synthetic. Synthetic 0W 20 Oil QT. 1 Quart Bottle.
What kind of oil does a 2014 Subaru take?
Browse Our Oil Change Guide and Schedule Your Next Oil Change in Wayne NJ
| Model Yr. | Engine | Oil Viscosity (SAE) |
|---|---|---|
| 2013 | 4 | 0W-20 |
| 2013 | 6 | 5W-30 |
| 2014 | 4 | 0W-20 |
| 2014 | 6 | 5W-30 |
What kind of oil does a Subaru crosstrek take?
The 2019 Subaru Crosstrek requires that you use 0W-20 full-synthetic oil on non-turbo engines and 5W-30 full-synthetic oil for turbo engines.
How much oil does a 2014 Subaru Crosstrek take?
Capacity: 5.1 quarts (with filter)After refill check oil level.
What brand of oil does Subaru recommend?
Subaru Synthetic 5W-30 Motor Oil is designed to help Turbo-charged engines withstand these conditions and prevent problems. While Subaru Synthetic 5W-30 Motor Oil is recommended for Turbo-charged engines, it offers excellent performance for all engine types.
How often does Subaru crosstrek need oil change?
Most Subaru vehicles on the road today should have an oil change performed every 6 months or 6,000 miles – whichever comes first.
How do you reset the oil light on a 2014 Subaru Crosstrek?
Oil Change Light Reset Subaru XV Crosstrek 2013 2014 2015
- Turn the ignition to the “RUN” position.
- Pull the i/Set switch towards you to display selection screen.
- Use the up or down arrows to highlight “MAINTENANCE” and pull the i/Set switch towards you.
- Choose maintenance item to reset and pull i/Set switch towards you.
Will 0w20 hurt a 5w30 engine?
Can I use a 0W-20 in my car that recommends 5W-30? No, if your owner’s manual calls for a thicker oil, you should not use a thinner SAE grade nor use a thicker oil for a recommended thinner oil vis-grade. Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine.
Is 0W-20 oil too thin?
Answer: Yes, 0W-20 is unquestionably safe for your engine. Engine designs and materials along with motor oil chemistry have made massive strides in the last 15 years, so engine wear has never been lower. The 5W-30 grade is rapidly being supplanted in new cars by 5W-20 and 0W-20.
What is the best oil for a Subaru?
The Subaru Crosstrek and the Subaru Impreza should use 0w-20 synthetic oil. When you are caring for the high performance that comes from a Subaru WRX or the Subaru BRZ , it is strongly recommended that you trust 5w-30 synthetic oil for the first oil change.
Does Subaru use a “break in” oil?
Whether Gunma or Indiana, Subaru does not use a break-in oil. The only thing unusual that a used oil analysis will show is high molybdenum which comes from the assembly lube and the pistons. If you’re looking for a break-in additive, try Red Line. Most straight grade conventionals are good break-in oils.
Where is the oil filter located on a Subaru?
The oil filter is up on the passenger side front of the engine. There is a shield under the engine. Remove the shield and the filter is tucked up high near the exhaust pipe. Very tough to get to.
What type of oil does a Subaru Outback use?
If your Subaru is a 2011 or newer Forester, a 2012 or newer Impreza, or a 2013 or newer Outback, Legacy, Crosstrek, Ascent, or BRZ, it is required to use synthetic oil.