How much does it cost to replace head gasket on Subaru Outback?

How much does it cost to replace head gasket on Subaru Outback?

Drain and fill the cooling system with some compatible coolant (you can buy it at the Subaru dealer, but its expensive). Add two of the bottles of Subaru Coolant Conditioner to the rad when cold (shake well before pouring). Its about $2 a bottle at the dealer.

What kind of head gasket does Subaru have?

Many of their models have been dented with this gasket problem. Their first-generation model was Impreza (1999). This was followed by Forrester (1999), Legacy (2000), Outback (2000) and Baja (2003), respectively. All these cars face the problem of an internal leak in the head which makes the engine overheat.

Can a Subaru Tribeca have a head gasket failure?

Head gasket failures are less common on the Subaru 3.0 and 3.6 L H6 models like the Tribeca. They are also rare on the turbo models such as the turbo Baja, Impreza WRX, and Impreza WRX STI. The black carbon deposit on the bottom of cylinder #4 (right) is a textbook symptom of a head gasket leak.

Why is my Subaru head gasket leaking oil?

When the head gasket is developing problems, there are slight gaps that let oil leak underneath the engine. If you discover oil is leaking from your Subaru car, that might be a symptom that the oil gasket is getting faulty. The head gasket is a passageway for coolant to flow appropriately.

Can a Subaru Phase II leak be repaired?

The Phase II 2.5L engine with external leaks can run a long time without needing to be repaired as long as you keep checking the coolant level and maintaining it full in the rad. Try two bottles of the Subaru Coolant conditioner to fix the leak, many have had good success with it, and its a lot cheaper than replacing the HGs.

What kind of head gasket does Subaru use?

In 1996 on the 2.5l engine Subaru used a composite type head gasket similar in construction to the head gaskets found in the Subaru Legacy & Impreza 2.2l engine. Starting in 1997 and used through 1999 Subaru began to use a multi layer steel shim head gasket with a graphite type outer film.

Why does my Subaru head gasket keep overheating?

From there what typically happens next is intermittent higher than normal coolant temperature gauge readings, followed with intermittent overheating especially during a long freeway trip or a drive up the mountain passes.

Posted In Q&A