How do you reset the oil change light?
Insert the key into the ignition, turning it without starting the engine. Locate the “select” stem near the speedometer and press it until you see the word “oil” or a wrench icon appear. Press and hold the stem for 10 seconds, or until the icon begins flashing. Release the stem and hold “select” again for five more seconds.
When do you reset the oil life monitor?
Oil Life Monitor Reset Procedure. When you get your oil changed your oil life monitor must be manually reset. If the oil life monitor is not reset when your oil is changed the system has no way of tracking the oil life and will turn on the change oil warning prematurely.
How to reset ” oil change required ” indicator-Ford Focus?
Make sure the car is off, click the key to the right twice (engine should NOT turn over), press both gas and brake petals firmly. Hold until “Oil reset in progress” text disappears to the “Complete” text. Remove pressure from petals, and start car! Thanks for watching! God Bless America. .
Where is the oil reset button on my car?
If you don’t see a “Reset” button on the dashboard, it’s probably under the hood. If necessary, consult your manual, or contact the manufacturer’s customer service department. Hold the button down until the “Oil” icon or word starts to flash, or the indicator lights show some other sign of resetting.
Can you reset the oil change indicator light?
As soon as that oil change indicator light turns on, you need to decide if you are going to replace the oil yourself and reset the light, or if you will have a professional do the job. If you can change the oil yourself, you can certainly reset the oil light. You only need to have your ignition key to perform this simple task.
What does the oil change light on the dash mean?
The little light on your dash is telling you that your oil is at a very low percentage of useful life, but you just changed it. What do you do now? Resetting the oil change light in an F-150 or an F-250 Super Duty is a simple task that can be done in a matter of seconds.
How to reset a GMC oil change light?
The following instructions cover the model year 2005, as well as older GMC products and Chevrolet vehicles without a vehicle information center (VIC). To reset the oil change light, follow these two steps: Slip behind the wheel and close all the doors. Insert the key in the ignition and turn the key to the accessory position.
How to reset service life after an oil change?
Turn ON the ignition, do not start the vehicle. 3. Push reset button until Spanner warning light symbol will start flash. 4. Keep button depressed until Spanner warning light symbol stops flashing and remains illuminated. 5. Indicator shows appropriate service interval. 6. Release reset button. 7.