What are the connections on my alternator harness?
Dear Sirs, I am putting a basket case 71 Chevy C-10 back together. The alternator wire harness has 4 wires, I assume the heavy one is the output and goes to the biggest post, the smaller one is a ground, and goes to the ground post. It also has 2- spade connectors, one is on a blue wire, and the other is on a white wire.
What kind of wire does an alternator use?
The alternator wire harness has 4 wires, I assume the heavy one is the output and goes to the biggest post, the smaller one is a ground, and goes to the ground post. It also has 2- spade connectors, one is on a blue wire, and the other is on a white wire.
What are the ” your ” and ” F ” connections on my alternator?
Thanks in advance You are correct as far as the positive and ground wires are concerned. The R and F terminals are the ‘Reference’ or voltage sense terminal and the ‘Field’ terminal. The color on the spade connectors doesn’t matter, you will have to use a multimeter to determine which connector goes to which pin.
How many 3 way connectors for Denso alternator?
Buy 1x connector 3 way 3 pin for denso alternator toyota 90980 11349. A wide variety of denso alternator wiring options are available to you such as automobile automotive.
How do you hook up an alternator?
Connect a 10-gauge wire from the output stud on the alternator back to the positive battery terminal. Make both connections with a solderless ring terminal. This connection can be made at the starter relay also, as long as it connects to the same terminal as the positive cable from the battery. Reconnect the negative cable to the battery.
How can I WIRE an alternator to a battery?
Attach a cable directly from the alternator output post to the positive side of the battery. This allows for full output from the alternator to the battery when heavy electrical demands are placed on the alternator. Wire the alternator controls.
What are the wires for on alternator?
The three wire types in a three-wire alternator include the battery positive wire, the voltage sensing wire, and the ignition input wire. The battery positive wire connects to the starter. The voltage sensing wire connects to the battery, and the ignition wire connects from the alternator to the key switch.