What size are stock sportster handlebars?
| Harley Davidson Model | Harley Davidson Description | Clamp Area |
|---|---|---|
| XL883R | Sportster 883R | 2-1/2″ x 4-1/2″ |
| XL883L | Sportster 883 Low/SuperLow | 2-1/2″ x 4-1/2″ |
| XL883N | Sportster Iron 883 | 2-1/2″ x 5-1/2″ |
| XL1200C | Sportster 1200 Custom (Risers 6″) | 2-1/2″ x 4-1/2″ |
What diameter are stock Harley handlebars?
As far as industry standards, Handlebars typically come in either 1″ or 7/8″ diameter. Almost all Harley applications will use 1″, however, for those riders looking for fatter bars 1 1/4″ and 1 1/2″ are available and may require special clamps/hand controls depending on the bars.
Can you change the handlebar on a 1998 Sportster?
A new handlebar can refresh the look of even a 1998 Sportster and make it look a decade newer for only about $80! The work can easily be done at home with only some two torx wrenches and a hex key. If you want to show your support for the tips, tricks, and info we put out, please Subscribe to our new YouTube channel here.
How are handlebars measured on a Harley Davidson motorcycle?
Motorcycle Stock Handlebar Measurements – Harley Davidson, Triumph, Victory, Honda, Kawasaki, Suzuki, Yamaha, Buell, Ducati and Indian See how we Measure Handlebars at the bottom of this page and also info on the Harley Davidson use of an electric throttle assembly. New cables and new brake lines?
Can a knurled handlebar be replaced on a Harley?
If you’re replacing the handlebar on a Harley you’ll need to get a bar that is dimpled or drilled or your cables will not fit. A knurled handlebar has grooves that help it from sliding around, a nice to have, but not necessary. There are small little pieces inside your throttle that hook up to the cables that get lost easily.
How much does it cost to change handlebar cable?
And yes buying dimpled and drilled bars will allow for internal wiring. It cost me around $330 or so for the bars and cable kit through Phatperformanceparts.com. Plus you will need a bottle of brake fluid and usually new grips. Only because getting the left one off your stock bar is tough.
What should the handlebars be on a Harley Davidson Sportster?
There is a multitude of handlebar options to alter the looks of your bike and change the riding position. Traditionally, bobbers will have a shorter, flatter set of bars such as a drag bar or straight “broomstick,” superbike bars, or even a set of low flat track bars.
Is it possible to change the handlebars on a motorcycle?
Though most aspects of such a project involve rearranging the stock parts, getting the right handlebar arrangement can involve swapping handlebars —though simply rotating the bar in its clamps may do the job for some riders. In some cases, simply changing or adding handlebar risers may accomplish what’s needed.
Can you lower the rear of a Harley Davidson Sportster?
There are various lowering shocks on the market to slam the rear of your bike too, but your ride comfort will suffer even with a sprung seat. If going for a more old-school approach, installing a set of struts can allow for additional lowering of the rear of the bike, but it still won’t look like a traditional hard tail.
Can a Sportster be converted to a Bobber?
The bobber style bike typically starts there and goes a lot further, cutting and unbolting every part until all you have left is a small solo seat, minimal lighting, low handlebars, and sawed off exhaust. Basically when your Sportster is just two wheels, a motor, a seat, and minimal places for the hands and feet, you’ve got a bobber.