What does p0017 stand for in GMC Canyon?
We’ll explore the symptoms and causes directly below. P0017 refers to which camshaft position sensor is out of time with the Crankshaft. In this case it’s sensor “B”, Sensor “A” throws P0016 P0017 should be considered an important trouble code to diagnose and repair.
What does p0014 mean on a GMC Envoy?
This includes the GMC Envoy. VVT adjusts the camshafts position at different RPM’s and engine loads to maximize the operating efficiency of the motor. P0014 means that the camshaft position is too far advanced from where it should be in relation to normal operating specs.
What does the PCM code p0017 stand for?
The CKP and CMP sensors work together to keep the PCM informed about engine timing. Should the timing be off, the PCM will set a code P0017. This code stands for Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor B). The B sensor is likely on the exhaust side.
What are the symptoms of engine code p0017?
Code P0017 may be accompanied by several different symptoms. These including: an engine that runs poorly, an engine that cranks but will not start and an illuminated check engine light. How do you troubleshoot code P0017 ? Perform a visual inspection of the sensors and connections. Many problems can easily be found in the harness and connectors.
We’ll explore the symptoms and causes directly below. P0017 refers to which camshaft position sensor is out of time with the Crankshaft. In this case it’s sensor “B”, Sensor “A” throws P0016 P0017 should be considered an important trouble code to diagnose and repair.
What does the OBD code p0017 mean?
What the P0017 code means. P0017 is the OBD-II generic code indicating that the crankshaft and camshaft position sensor for bank 1 exhaust camshaft do not correlate signals with each other.
How much does it cost to repair a p0017 GMC?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost of diagnosing the P0017 GMC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
What causes a crankshaft to be in p0017 position?
To sum things up, the common causes for code P0017 are as follows: 1 A faulty cam or crank sensor 2 The cam or crank circuit is open or shorted 3 The timing belt/chain is out of time 4 The cam or crank tone ring is slipped/broken 5 A problem in the VVT system 6 The PCM is faulty
Where are the crank / cam sensors on a GMC Canyon?
A lot of the harness leading to and from the Crank/Cam sensors is going to be exposed to hot exhaust and vibration. This is a great place to start diagnosing P0017 in your Canyon. It’s quick and easy to do this before moving on to the sensors themselves. Make sure to check the harness where it plugs into both sensors as well.
Why does my Cadillac CTS p0017 not run?
The timing chain or belt will throw cause P0017 to throw. This will happen when it has stretched or jumped a tooth or two. If it jumps more than a few teeth, the odds are that the engine itself will not run at all. If you’ve recently changed the timing chain, it may very well have not been aligned properly on install.
What is the trouble code for GMC Envoy?
P0014 is a relatively common trouble code for vehicles that have Variable Valve Timing (VVT). This includes the GMC Envoy. VVT adjusts the camshafts position at different RPM’s and engine loads to maximize the operating efficiency of the motor.
Where is Bank 1 on a GMC Envoy?
P0014 affects bank 1, which is on the side of the engine where cylinder one occurs in the firing order. Typically, P0014 will cause quite a few noticeable symptoms in the GMC Envoy. They include (but are not limited to):
A lot of the harness leading to and from the Crank/Cam sensors is going to be exposed to hot exhaust and vibration. This is a great place to start diagnosing P0017 in your Canyon. It’s quick and easy to do this before moving on to the sensors themselves. Make sure to check the harness where it plugs into both sensors as well.