Where does an air fuse need to be installed?
The Air Fuse should be installed directly between fixed or rigid pipework and the flexible tube to protect the whole length of the flexible tube. Only tubing after the Air Fuse is protected. The Air Fuse must be installed in the correct orientation. Failure to do this will render the Air Fuse ineffective.
What happens when the air injection pump is not working?
But in situations when the secondary air injection pump is not working, you can expect the RPM to drop. This may cause the car to vibrate or even stall as noted above. If you’ve already experienced engine stalling, poor acceleration, and a check engine warning light, then you need to have the secondary air injection pump checked out immediately.
Where is the shut off valve before the air fuse?
When a shut off valve is located before the Air Fuse, the valve must be opened slowly in order to control initial air flow and avoid decompression effects which may trip the Air Fuse.
What do you need to know about a secondary air pump?
If you’re wondering what a secondary air injection pump is, you’re not alone. In this article, we’ll go over the purpose of the secondary are pump as well as the symptoms you should watch for that indicate the pump is failing. What Does a Secondary Air Pump Do? What Does a Secondary Air Pump Do?
Where are the fuses for the Auto Ride compressor?
It is in the same fuse block, fuse number 2 and it is a 30 amp fuse. Any of these components, compressor relay, the three fuses and the module could be the problem. This system relies on several other inputs to determine when the compressor turns on or off.
But in situations when the secondary air injection pump is not working, you can expect the RPM to drop. This may cause the car to vibrate or even stall as noted above. If you’ve already experienced engine stalling, poor acceleration, and a check engine warning light, then you need to have the secondary air injection pump checked out immediately.
Where is the fuse for the compressor relay?
In addition to the 40 amp fuse that directly powers the compressor, there is also a fuse that powers the primary side of the compressor relay. It is located in the same fuse block, it is a 10 am fuse number 54. In addition to these two fuses there is the main power fuse for the suspension module.
Where is the fuse for the level control compressor?
The fuse for the level control compressor is located in the under the hood fuse block. It is a 40 amp fuse number 61. There is also a relay between this fuse and the electronic suspension control module. In addition to the 40 amp fuse that directly powers the compressor, there is also a fuse that powers the primary side of the compressor relay.