Where are the torque adapters on a Suzuki?
Tekxtc typed the list out in the following post as Ram’s web server threw the original list away. Fierce! I’ve got lots of impromptu torque adapters I use while working on my bikes. For instance, here are two that I’ve rigged up to torque the two 6mm nuts that are on the starboard side of the bottom of the cylinder assy.
What kind of wrench do I need to torque a Suzuki?
For instance, here are two that I’ve rigged up to torque the two 6mm nuts that are on the starboard side of the bottom of the cylinder assy. This one uses a standard 10mm combination wrench. The open end of the wrench fits perfectly on the drive square of my 3/8″ torque wrench:
How much torque do you need in a Suzuki SV650?
The rear sprocket values are too high too, 25-30ft-lbs is enough. In general, with rare exceptions like rod and cylinder head bolts you’re better off leaving the the torque wrench in the bottom of the tool box.
What are the torque specs on a Suzuki?
Torque is specified as being a quarter turn when new, and eighth turn when used. ride singles! Spark plug torque for aluminum head? Torque is specified as being a quarter turn when new, and eighth turn when used. Assume that your starting point is for the plug to first be finger tightened? I don’t own a cage. Rocks!
How much torque should I put on my handlebars?
It is a 97 fatboy that I am throwing them on. Click to expand… For the touring bikes, they say to tighten the front bolts down to the point the the upper and lower sides of the clamp are touching, then tighten the rear to 12 to 16 ft/lbs; then the fronts to 12 to 16 ft/lbs. I normally go right by the book on torque values.
What should the torque be on a fxdi handlebar?
On an 04 FXDI there are bolts under the top of the triple tree that go into the riser. Again guessing, these two are the “Riser Clamp Screws” and should be torque to 144-180 in lbs.
Item N*m kg-m lb-ft Starter clutch bolt 10 1.0 7.0 Generator stator set bolt 10 1.0 7.0 Generator stator clamp bolt 5.5 0.55 4.0 Crankshaft position sensor set bolt 5.5 0.55 4.0
What do you need for a LSL handlebar conversion kit?
Kits which require them also contain items like clutch lines or cables, mirror stays and other necessary accessories. LSL handlebar conversion kits include silver bars, and clear coated brake lines with silver anodized aluminum fittings (when applicable).