What bulbs are compatible with H1?
Headlight & Fog Light Bulb Cross-Reference Guide – LED | HID | Halogen
| Bulb | Equivalent to | Lighting Technology |
|---|---|---|
| H1 | H1ST/XV | LED, HID and Halogen |
| H10 | 9005, 9040, 9055, 9140, 9145, 9150, 9155 | LED, HID and Halogen |
| H11 | H8, H9, H16 (L-Shaped) | LED, HID and Halogen |
| H11B | None | LED, HID and Halogen |
Is H1 bulb high-beam?
H1 bulb is a high-beam light that illuminates the surroundings over a long-range. It is a single beam light with one filament.
Is H1 a low beam?
The H1 is used for the high-beam light, whereas the H7 is used for the low-beam light. The H1 and H7 are both single-beam lights and use a single filament to create a fixed beam.
Will H3 bulbs fit H1?
The H1 appears to be longer and thinner, and the bulbs both have different bases. The H1 bulb uses a P14. 5 base, whilst the H3 bulb uses a PK22s base and has a wire protruding from the bottom. You can’t simply switch H1 for H3 and you can’t plug a H1 bulb into a H3 fitting.
What are H1 bulbs used for?
The H1 is a halogen lamp designed for use in automotive headlamps and fog and driving lamps. It has also been widely applied in emergency vehicle lights.
Is H1 same as H3?
They’re identical bulbs that simply fit different headlights. Whether you pick the H1 or the H3 in a range, you’ll receive the same results in terms of light output and colour temperature. So – don’t worry. If you’ve got a H1 or a H3 fitting, you’re not going to miss out.
Are H1 and 9006 bulbs the same?
Focal point of the light bulb will be different. The H1 conversion kit is made for H1 base so that the focal point didn’t change. while you will need major modification in order to make the 9006 or D2R bulb to fit the base and have the same focal point of the H1 bulb.
How many watts is H1 bulb?
55 watts
Power and output Under ECE Regulation 37, which governs automotive filament lamps in most of the world, the H1 lamp’s nominal rating is 55 watts at 12 volts, and its test rating is 68W (maximum) and 1550 ±15% lumens at 13.2V.
Can I use 9006 instead of H1?