Where is the oil sensor on a 2005 Jeep Liberty?
The oil pressure switch is located just above the oil filter on the 3.7-liter engine of the Jeep Liberty.
How do you reset the oil light on a 2005 Jeep Liberty?
How To Reset Jeep Liberty Change Oil Minder Light (2008-2012)
- Stop the vehicle and turn the ignition switch to the RUN position without starting the engine.
- Fully depress the GAS PEDAL slowly three times within 10 seconds.
- Turn the ignition off and start the engine to verify the indicator has been reset.
Why does my Jeep Liberty have a low oil pressure light?
If your Liberty’s sensor has gone bad, it’ll shoot a false low pressure reading to the ECM. One of the first things that people do when they have the low oil pressure light is to change out this sensor to see if that rectifies the problem. Here’s a good article on how to check the oil pressure sensor from itstillruns.
What kind of oil does a Jeep Liberty use?
I have a 2002 Jeep liberty, 3.7 L gas engine with 99,000 miles. The oil light came on so I took it to my mechanic. I was using a semi-synthetic oil, he took it out and put the factory recommended oil in it. Light went out for about an hour then came back on.
When does the oil light come on on a 02 Liberty?
Just got a 02 liberty and am having the oil light problem,, seems to be common,,replaced sensor and now comes on at 200rpm everytime. the old one had oil on it and only came on when slowing down. It has all new oil and filter and next of course will be the gauge test but we all know that will be fine.
What to do if your liberty has low oil pressure?
As stated above, checking the oil level in your Liberty is definitely the place to start diagnosing low oil pressure. If the oil level is really low, you’ll need to fill it up until it’s back to the full mark. This may solve the problem. Keep in mind that if the oil has leaked out once, it will leak out again.
When does the oil light come on in a Jeep Liberty?
I have a 2006 Jeep Liberty 4X4, 3.7 liter engine. The oil light will come on when initially started after sitting for awhile. However, if the engine is cut off and re-started the oil light does not come on again. The oil is changed every 3,000 miles since purchasing the vehicle in February 2009. Any solutions to this little mystery.
Why does the oil light come on on my Grand Cherokee?
Click to expand… Same issues as on my 03 grand cherokee and my Oldsmobile when i had it. Replace the oil pressure sensor/sender if you have not already. Its the culprit 9 times outta ten. Replaced the oils pressure switch and it still is having problems. It will randomly die, then the oil light comes on.
When to reset the oil change indicator on a jeep?
When your vehicle is ready for an oil change, Jeep has a recommended list of scheduled maintenance items that coincide with the mileage accrued: After your oil change and servicing is complete, you might need to reset the Oil Change Indicator system in your Jeep. Learn how to do this by following the directions below:
What kind of engine does the Jeep Liberty have?
The 2008 Liberty debuted at the 2007 New York International Auto Show. With the smaller Patriot and Compass crossover SUVs now available to cater to economy conscious buyers, the four-cylinder engine was dropped from the Liberty’s offerings. The iron-block, aluminum-head V6 was the only engine available for 2008.