Where is the fuel pump on a Toyota Camry?
Without fuel, your Toyota Camry cannot run, and the fuel pump is instrumental in delivering fuel from the fuel tank to the engine. This part can wear out over time, which means it may need to be replaced. It is located under the rear passenger seats in the fuel tank. The seats will need to be removed in order to get to the pump.
How do you pressurize a Toyota Camry?
When you are finished, you need to pressurize your Toyota Camry fuel system. You can do this by turning on the ignition for a few seconds. Turn it off for 10 seconds, and then repeat the entire “on” and “off” sequence from five to ten more times.
What to do if your fuel pump doesn’t work?
Thought it was a bad pump so dropped the tank and replaced it..still didn’t work so checked for power at the connector under the rear seat.. nothing.. Swapped out the EFI relay and EFI fuse with working ones still nothing. Jumped the e1 and t terminals in the diagnosis box to check for check engine codes and its showing normal, no problems.
Where is the fuel pump located on a Honda Accord?
It is located under the rear passenger seats in the fuel tank. The seats will need to be removed in order to get to the pump. The pump is easy to reach after the seats have been removed. It is a modular unit that may only need a pump replacement rather than the entire unit.
What is the fuel pressure on a Toyota Camry?
The fuel pressure specification on the 1997-2001 2.2L Toyota Camry is: 44-50 PSI with the Key On Engine Running (KOER) or Key On Engine Off (KOEO). NOTE: On 1997+ fuel pressure is KOEO and KOER (fuel pressure regulator is mounted on the in-tank fuel pump).
What happens if the fuel pump doesn’t work?
The most common type of failure is total failure. In these cases, the fuel pump stops working completely. The end result is a car that won’t start. The other type of failure is a fuel pump that seems to work, but that isn’t sending the correct volume of fuel to the fuel injectors. In these cases, your Camry will usually start but not run optimally.
How do you remove a fuel pump from a car?
You can now withdraw the fuel pump from the housing. Connect the new fuel pump into place on the assembly housing. Reassemble the fuel pump/sending unit in order, from the electrical connector to the fuel sock filter, rubber isolator and bottom plastic support. Place the pump unit back within the fuel tank and reattach the bolts.