What tools do you need to change a tire rod?
A wrench, a ratchet set, needle nose pliers, mallet or hammer, grease gun and an inner tie rod tool are needed to remove the inner or outer tie rod ends from the steering knuckle or ball joint depending on which tie rod end.
How do you replace an outer tie rod?
Move the pinch nut up to touch the outer tie rod end. This will mark the location of your outer tie rod end and you will know how far to thread on the replacement. Do not tighten the pinch nut. If you do, you will not be able to easily turn the outer tie rod end. Remove the cotter pin.
How do you remove tie rod from steering knuckle?
Use it to pry the shaft out of the steering knuckle. Remove the outer tie rod end from the inner tie rod end. To do this, you will twist the outer tie rod end off of the spindle of the inner tie rod end. Turn it counterclockwise to loosen.
Where are the tie rod ends on a car?
Locate the outer tie rod end. When you remove the wheel, you will be able to see the steering knuckle. There will be a shaft going through this knuckle with a castle nut on the bottom and a round head on top. This is the outer tie rod. Locate the inner tie rod end. Cars often have an inner tie rod end as well.
Do you need tool to remove inner tie rod?
You don’t need any specialized equipment or tools for accomplishing this task. With a little bit of know-how and basic tools, you can remove the inner tie rod with much ease. Here are the steps you need to follow to remove the inner tie rod.
How do you remove a tie rod from a steering wheel?
Remove the outer tie rod end from the steering knuckle. To do this, you can use a tie rod puller or a ball joint separator. Insert the tool between the ball joint of the outer tie rod end and the steering knuckle. Use it to pry the shaft out of the steering knuckle. Remove the outer tie rod end from the inner tie rod end.
When to replace the outer tie rod ends?
The outer tie ends are an integral part of the steering system. With all this movement and stress, they will eventually wear beyond their limit. If an inspection reveals a worn tie rod end, you can replace it yourself.
Can a rack and pinion outer tie rod be removed?
One nice part with rack and pinion outer tie rods is that they often can be removed from the car without upsetting the alignment specs. The outer tie rod end threads onto the inner tie rod end and is held securely in place with a jam nut.