Does optical drive need SATA?
Serial ATA (SATA) optical drives require the same basic installation steps as standard ATA/ATAPI optical drives, except that SATA drives do not require setting a Master/Slave jumper. We do not recommend using SATA optical drives, because they are plagued with compatibility problems.
Does CD drive use SATA?
1Remove your computer’s case and examine the data cables that run from your computer’s motherboard (the large, flat circuit board filled with chips and cables) to your CD/DVD drive or drives. If the drive’s cable is small (left), then your computer uses SATA drives. (The SATA connector is often labeled, too.)
Is my optical drive SATA 2 or 3?
On the left in the device selection panel go to the Motherboard section. The right side of the window will show which SATA ports are available. If 6 Gb / s is written near the port, it means that it is SATA 3 standard. If 3 Gb /s is written near the port, it means that it is SATA 2 standard.
Does optical drive use SATA 3?
It’s a SATA 3 PORT ( linking the optical drive bay to the laptop motherboard) so you’ll be getting your M.
How install SATA drive optical?
Install the optical drive in the drive cage. Connect the SATA-power cable to the optical drive. Slide the optical drive assembly with the SATA-power cable into the optical drive bay until it clicks into place. Connect the optical drive power-SATA cable to the system board.
Can I use optical drive SATA cable for SSD?
They are all the same. Sata is sata. He’s pretty much correct. There are Sata 3GB/s cables and Sata 6GB/s cables but no hardware you run will see any difference between the two.
Can I use SATA cable of optical drive for SSD?
Honorable. If you’re going to buy an SSD, just buy a SATA cable to go with it.
What is SATA optical drive?
SATA optical drives feature a slim plug that features a right-angle notch, ensuring it only fits one way. Gently push the plug into the drive’s socket, and then check that it is parallel with the drive’s back end. When in place, apply firm pressure to ensure the connection is secure.