Does a closet rod need to be in a stud?
Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
Can you use PVC for closet rods?
The PVC pipe was much less expensive than buying custom closet rods and it worked just fine as the closet rods. I put in an extra bracket to support the top rail and prevent sagging in the middle.
Can you hang closet rod with drywall anchors?
To securely install a closet rod in drywall: Drive screws into the wall stud or drywall anchor, securing the bracket in place. Repeat this process for additional brackets, making sure they are level with the first bracket. Set your closet rod in place and use it to hang your clothing.
How far from back wall should closet rod be?
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.
How do you attach a closet rod to the wall?
Attach the round-bracket to the wall using a 2” wood screw. Repeat the process on the other side of the closet for the u-shaped bracket. Measure the distance from bracket to bracket. Measure and mark the closet rod at desired measurement with a pencil.
What kind of socket do I need for closet rod?
These sockets come in a wide variety of styles and are usually made of either metal or wood. If you choose a metal socket, you can typically also choose from several finishes, including silver and white. Some rod sockets are attached to shelf brackets. These can be used to hold the rod and to put a shelf above the rod area.
How big of a hole do I need to drill for a closet rod?
A minimum of 10 inches is best, but it’ll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice. Pre-drill a hole for the bracket screw using a quarter inch drill bit.
How tall should a closet rod be set up?
In order to make the closet rod truly helpful, put it at a height that makes it accessible and useful. In general, it’s a good idea to mount a single rod at 5 feet (1.5 m) tall. A double rod set up should have the bottom rod mounted at 3.5 feet (1.1 m) and the upper rod mounted at 7 feet (2.1 m).