When to turn on the cooling fan on a Toyota Camry?
This is normal. 1. CHECK COOLING FAN OPERATION WITH LOW TEMPERATURE (Below 83 C (181 F)) Turn the ignition switch ON. Check that the cooling fan stops. If not, check the cooling fan relay and ECT switches, and check for disconnected connectors or wire breaks between the cooling fan relay and ECT switches.
Why is the radiator not working on my Toyota Camry?
Just because the radiator fan is not on does not mean that it is not working. They are designed to only run when needed. If your Camry is running hot, and the fan is not running we’ve laid out the most common causes of this issue below.
Why does the radiator fan not come on when the AC is on?
In order for the AC Condensor to do its job it must stay as cool as it can. As for the engine coolant temp sensor, if the coolant is not hot enough to make the fan come on, then there is no need for the fan yet and there is no problem.
How can I tell if my Camry fan is bad?
The fan wiring is some of the more vulnerable wiring in your Camry. You can test the voltage going from the fan relay to the fan itself. If it is getting 12+ volts, the fan should be coming on. But if it’s not, which means the fan has gone bad.
What should the ammeter reading be for a Toyota Camry?
Check that the cooling fan rotates smoothly, and check the reading on the ammeter. Standard amperage: 8.0 to 12.0 A at 20 C (68 F) If not, replace the cooling fan. Reconnect the cooling fan connector. 1. INSPECT RELAY (FAN No. 1, FAN No. 3)
What kind of radiator does a Toyota Camery have?
There is really not much to say. This radiator fit/worked perfectly in my 2000 Toyota Camery.
Where is the ECT switch on a Toyota Camry?
Disconnect the ECT switch No. 1 connector. Connect the terminals on the ECT switch No. 1 connector. Check that the No. 1 cooling fan rotates at a high speed. If not, check the No. 1 cooling fan relay and No. 1 cooling fan. Reconnect the ECT switch No. 1 connector. Disconnect the ECT switch No. 2 connector.
What’s the color of the wiring on a Toyota Camry?
As you look at the list below, note that the color blue is represented by the letter “L” to separate it from the letter “B” used to identify “black”. Also note that there is no “light blue” wire designation used in Toyota wiring harnesses. If it is any shade of blue, it’s considered blue (L).
Why does my Toyota blower not come on?
If the blower comes on only when the switch is set at max then it is the resistor pack is bad. See if you can get the A/C light to come on. If nothing happens at all then its the switch. I’ve never been able to find a fuse or relay for this. Give your switch a nice swift hit with the palm of your hand.
Why is my AC not working on my 1992 Toyota Camry?
When working on a 1992 Toyota Camry with the 4 cyl engine. The AC system was working fine and I drove it to the gas station and upon starting it to go home the AC just did not work at all. I used some common sense; I knew that when the compressor or other parts of the AC system go out, you will at the least get hot air coming out of the vents.
Why does my blower fan not keep working?
There’s a switch or something located under the blower fan that goes bad, and not all the fan speeds will keep working. Like on mine, the lowest fan speed no longer works, but the rest do. That’s the blower resistor.