What kind of engine does a 1988 Toyota Pickup have?
GR Auto Gallery is pleased to offer this 1988 Toyota Pickup for your consideration. It is powered by one of Toyotas bulletproof engines, the 22RE 2.4L inline-4. Mated to the motor are a 5-speed man…
What kind of engine does a 1988 Toyota SR5 have?
This 1988 Toyota SR5 pickup is powered by a v6 with an automatic transmission. It was recently resprayed with Land Cruiser graphics applied. This pickup runs and drives great. Please call with ques…
Can you run a Toyota R134a in a truck?
Summer is just around the corner here in Sunny AZ, so I am looking at getting the AC running in my truck – ’91 V6 4WD. I need a new compressor and was planning on replacing the drier/accumulator and expansion valve as well. Since it is R12, I am considering replacing the condenser as well (+ $100) and just running R134a instead.
How much does a 1988 Toyota pickup cost?
Monthly Estimate based on a 4.4% rate for 60 months, $16,999 vehicle price, $0 down payment, $0 trade-in, $0 sales tax. Read 51 more dealer reviews…
Where was the 1988 Toyota pickup truck last serviced?
No accident or damage reported to CARFAX. Number of owners unknown. Last serviced at 133,656 miles in Puyallup, WA on 07/20/16 • Vehicle serviced • Maintenance inspection completed • Tires rotated. No accident or damage reported to CARFAX. Number of owners unknown. Last serviced in Sioux Falls, SD on 05/13/21 • Vehicle serviced.
What kind of horsepower does a Toyota Pickup have?
The naturally-aspirated 2.4-liter produced 102 to 117 horsepower and 132 to 140 foot-pounds of torque, while the turbocharged version produced 135 horsepower and 173 foot-pounds of torque. The 3-liter V6 produced 145 horsepower and 180 foot-pounds of torque.
1988 toyota pickup, great daily driver as well as weekend toy. Motor rebuilt by Putney in chico at 150k, now has 190k, K&N cold air intake, hedman headers with borla exhaust. Transmission rebuilt at 180k with new clutch, front differential
When did the Toyota 22R engine come out?
In 1985, the 22R engine was redesigned, many parts from the newer 22R (such as cylinder head, block, pistons, the timing chain, and cover, water and oil pumps) are not compatible with those from the older pre-1985 engine.
Summary: Make – Toyota, Model – Pickup, Price – $5,000 Seller Description: 1988 Toyota 4X4 Pick Up. 133 k miles. Rebuilt motor with only 3000 miles on it. Light cam work, headers, easily passes smog. True track differentials. Runs
What kind of carburetor does Toyota 22R have?
Cylinder bore and piston stroke are 92.0 mm (3.62 in) and 89.0 mm (3.5 in), respectively. The Toyota 22R engine has a carburetor fuel system and ignition system with a mechanical distributor. In 1983, Toyota swapped the dual-row timing chain used in older 22R engines for a single-row chain with plastic guides.
Where can I find 1984 Toyota pickup parts?
If you dont see the 1984 – 1988 Toyota Pickup used part or 1984 – 1988 Toyota Pickup used parts car you are looking for then please call us here at 1-877-551-5575. We want to be your source for 1984 – 1988 Toyota Pickup used parts.
What kind of power does a Toyota Pickup have?
Toyota trucks really have earned a long-standing reputation for ruggedness. So it makes you take notice of this 1993 pickup with its lifted stance and fuel-injected V6 power to enhance the 4×4 expe… More Info ›
What’s the VIN on a 1989 Toyota pickup?
1989 Toyota Pickup 4X4 VIN: JT4RN01P5K0001930 Check out this amazing 1989 Toyota Pickup 4X4! This Toyota is in great condition inside and out and its only had one owner since new! Take a look at th… More Info › Sam Keller attends the 30th Motor Muster, a weekend-long festival celebrating vehicles produced from 1933-1978.
Why is my brake proportioning valve stuck in one position?
If your brake system has not been previously worked on or suffered no brake leaks from the wheel cylinders, calipers or master cylinder, chances are the brake proportioning valve is stuck in one position, tripping the brake dash light.
Why does my brake valve stop working when I stop?
The valve stops the flow, or pressure of brake fluid to the rear drum brakes during every heavy braking or emergency stops; otherwise, the rear brakes lock up and skid, receiving too much pressure from the master cylinder.
What can I do if my brake Bleeder is not working?
Loosen the brake bleeder with the flare nut wrench and allow brake fluid to exit. If you see air and bubbles, repeat the process again until a clear stream of brake fluid exits the valve.
What kind of problem does my Toyota truck have?
I have a 1988 Toyota (4 cylinder) Pickup truck, with a very intermittent starting problem, that is driving me crazy. It has had the starting problem for over a year now. Normally is starts easily, within one second with the starter motor, no gas needed, and it starts smoothly.
Is the 1988 Toyota pickup truck stick shift?
NOT … more Toyota Truck 1988sr5 This is a Rare, Clean, Low- Low Mile Toyota, This has been a third vehicle for me as well as for the first owner. Th… Yes! Yes! Yes! Stick shift!
When did the Toyota 3VZ engine come out?
Toyota introduced the 3VZ V6 engine in 1988, featuring a cast iron block and aluminum heads. The 3VZ is a 3.0l single over head cam (SOHC) engine Toyota produced from1988 thru 1995 for use in their Pickups, 4Runners, and T100s.
What kind of warranty does a Toyota 3.4L have?
Toyotas 3VZE 3.4L uses TTY head blots. TTY is Torque-To-Yield, meaning the head bolt stretches and is a onetime use head bolt. The 3VZE long block comes with a 2 year /24,000 mile warranty included. Engines sold with exchange for your rebuildable core. *Also includes an OEM Aisin oil pump installed.
What kind of engine does a Toyota Pickup have?
Motor Engine 3.0L 3VZE 6 Cylinder Fits 88-92 4RUNNER Toyota Pickup If you still love your pickup but it is just not running the way it used to, you might want to replace the entire engine. Instead of buying a different truck, you can get a complete engine and replace it in your Toyota pickup.
When did Toyota start making the 3.0 liter engine?
Toyota started the production of 3.0 liter 3VZ-FE engine in 1987 as the new engine for Toyota 4Runner. This engine was installed in other off-road Toyota models in the future. The engine is similar to its predecessor the 2VZ engine, but the more significant displacement is not the one difference.
Which is better Toyota 4.10 or 4.88 third member assemblies?
Each new generation of Toyota 4.88 third member assemblies or Toyota 4.10 third member assemblies are stronger and last longer than the one prior, and you can be sure you’re choosing from a top-notch selection of products every time you visit our online superstore. An assembly project is not such a big undertaking when you work within your budget.
When did the Toyota Hi Lux pickup truck come out?
In 1964, Toyota entered the U.S. pickup truck market with the Stout, but the Stout had very little impact on the U.S. market and was dropped in 1967. In 1969, Toyota released a new — more refined and compact — pickup known as the Hi-Lux.
Are there any Toyota pickups left in stock?
Only 18 left in stock – order soon. . Only 16 left in stock – order soon. . Only 3 left in stock – order soon. . Only 2 left in stock – order soon. . . Only 1 left in stock – order soon. . Usually ships within 1 to 2 months. . Only 2 left in stock – order soon. . Only 19 left in stock – order soon. . . Only 5 left in stock – order soon. . . .
What kind of transmission does a Toyota truck use?
Toyota truck transmission identification. Toyota manual transmissions for rear wheel drive applications are made by Aisin and similar (but not identical) to the AX series used by Dodge & Jeep and AR5 used by GM & Isuzu.
What kind of transmission does a Toyota SR5 have?
This 1988 Toyota SR5 pickup is powered by a v6 with an automatic transmission. It was recently resprayed with Land Cruiser graphics applied. This pickup runs and drives great.