Why can I hear my DVD but not see it?
Ensure the video cable between the DVD player and TV is securely connected to both devices. Play a different DVD to determine whether or not the problem is being caused by the disc itself. NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches.
How do I get the sound to play on my TV from my DVD player?
Connect your Blu-ray player to your TV using an HDMI cable. This will transmit both the video and the audio to your TV with one cable. Connect the AUDIO OUT ports on your DVD player to the AUDIO IN ports on your TV with standard audio cables (red and white jacks).
What input should TV be on for DVD?
HDMI: The most modern connection, HDMI resembles a longer, thinner USB cord. HDMI connections are the highest quality connections and you only need one cord for both the audio and video. A/V Cables (Three-Prong): Standing for Audio/Visual cables, this the most common connection for DVDs.
Why is my TV screen black but I can hear it?
Replace the HDMI cable as it may have a short or another defect which causes the black screen issue. Unplug the TV for 5 minutes to attempt a reset. Unplugging the TV will reset the television and clear any temporary issues. Factory reset of the TV to resolve the issue.
How do you fix a DVD that won’t play?
How to Fix DVD Won’t Play – 7 Solutions
- Solution 1: Check if the DVD type is incompatible with DVD player.
- Solution 2: Clean the dirty DVD or try a different disc.
- Solution 3: Ensure solid connection between DVD player and TV.
- Solution 4: Install Third Party DVD Player Software.
- Solution 5: Update DVD Firmware.
Why is audio not working through HDMI?
Make sure the volume is turned up. You also may need to go into the set-top box menu and select HDMI in the Audio Settings or Audio Coding section to pass the audio to the TV. You may need an update to your set-top box firmware, or a newer set-top box from your service provider.
How do I enable HDMI audio?
Answers
- Right-click the volume icon in the system tray.
- Click “Playback Devices”
- Find your HDMI Output device, and either right-click it and select Enable, or open Properties and set “Device Usage” to “Use this device (Enable)”
Why does my TV say no signal when HDMI is plugged in?
Verify that the source device has power and is turned on. If the source device is connected with an HDMI® cable: Make sure the TV and source device are both turned on, then disconnect the HDMI cable from one of the devices and then connect it again. Try a new or another known working HDMI cable.
How can I watch a DVD on my smart TV without a DVD player?
In fact, you can play DVD on Samsung TV without a DVD Player. As long as you take the advantage of Samsung TV’s USB port and Plex Media Server, you can easily play DVD movies, music files, TV series on Samsung TV without a DVD, a specific DVD player, and finding out the corresponding cable.
How do you fix an HDMI black screen?
Unplug the power cord from your digital box, wait for 30 seconds, then plug it in again. Wait until the box has fully powered on again, then see if the picture has returned. If that doesn’t fix it, If you have an HDMI cable connected to your TV, you could try an HDMI handshake.
Why is there no sound when playing a DVD on TV?
Reason 1: DVD Player Connection or Cable Issue. A potential reason why there isn’t any sound when playing DVD on TV is due to DVD player connection, namely whether the cables are placed in the right place or placed firmly.
Why is my DVD player not showing a picture?
pressing the PROGRESSIVE button on the front of the DVD player or P.SCAN button on the remote control to disable the progressive signal. power off the DVD player and press 369 using the number buttons on the remote control, then power back on the DVD player. moving the VIDEO OUT switch on the back of the DVD player to the INTERLACED position.
How do you turn off a DVD player?
power off the DVD player and press 369 using the number buttons on the remote control, then power back on the DVD player. moving the VIDEO OUT switch on the back of the DVD player to the INTERLACED position. pressing and holding the PAUSE button on the front of the DVD player for 5 seconds.
Can you play a DVD on a HDTV?
Thus, you can play DVD movie on HDTV via USB port in digital format without using DVD player. Free download Windows or Mac version to have a test. ★ A potential reason to DVD player no sound on TV trouble is related to the connection, whether the connection is proper and firm in a place or not. ★ Make sure your cables are in right spot on both.