What happens when ignition coil pack goes bad?
When an ignition coil pack or Ignition Control Module goes BAD, on your 2.2L Chevy Cavalier or Pontiac Sunfire, the car will suffer a misfire condition or a ‘no spark no start’ condition. Here’s a short list of symptoms: Check Engine Light (CEL) on. Misfire Codes: P0300, P0301, P0302, P0302, P0304.
Why is there no spark in my ignition?
An ignition module requires some type of external input in order to activate. If your vehicle stalls unexpectedly during operation and will not start again, it is likely because of loose or corroded electrical connections in the ignition module. In this case, check the switch, clean oxidized terminals, and replace broken wires if necessary.
What is the misfire code on a GM 2.2L?
Check engine light (CEL) on. Misfire Codes: P0300, P0301, P0302, P0302, P0304. Misfire Condition without any misfire codes lighting up the check engine light (also known as the Malfunction Indicator Light: MIL).
How to test the GM 2.2L ignition coil pack?
To see all of the GM 2.2L ‘How To Test’ Articles, you can go here: GM 2.2L Main Index Of Articles.
When an ignition coil pack or Ignition Control Module goes BAD, on your 2.2L Chevy Cavalier or Pontiac Sunfire, the car will suffer a misfire condition or a ‘no spark no start’ condition. Here’s a short list of symptoms: Check Engine Light (CEL) on. Misfire Codes: P0300, P0301, P0302, P0302, P0304.
An ignition module requires some type of external input in order to activate. If your vehicle stalls unexpectedly during operation and will not start again, it is likely because of loose or corroded electrical connections in the ignition module. In this case, check the switch, clean oxidized terminals, and replace broken wires if necessary.
Check engine light (CEL) on. Misfire Codes: P0300, P0301, P0302, P0302, P0304. Misfire Condition without any misfire codes lighting up the check engine light (also known as the Malfunction Indicator Light: MIL).
To see all of the GM 2.2L ‘How To Test’ Articles, you can go here: GM 2.2L Main Index Of Articles.
What to do when your engine has no spark?
Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. Finally, Have someone crank the engine and watch for spark. Remove one of the coils from the spark plug. Use an extra spark plug. A spark plug tester. Or even a screwdriver in the end of the coil.
What causes a car to stall with no spark?
Consequently, An old or failing ignition pickup may cut out signal intermittently, which may cause the engine to stall. The engine may suddenly just shut off, almost as if the key had been turned off. Depending on the nature of the issue, sometimes the vehicle can be restarted and driven.