When did Nissan stop making the KA24DE engine?
Yet KA24DE engines have high fuel consumption (do not be surprised with it). But in total, KA24DE engine is a secure and durable motor. Nissan KA24DE engine production stopped in 2004 due to the release of more advanced 2.5L Nissan QR25DE.
What kind of engine does a Nissan 240SX have?
It is a 2.4L inline four-cylinder engine that uses an iron cylinder block with an aluminum cylinder head. The KA24DE is the engine that almost all Nissan 240SX series used in America.
What causes an engine to misfire in a new car?
7 Common Causes of an Engine Misfire 1 Bad Ignition Coil (New Cars) / Distributor (Old Cars) 2 Bad Spark Plugs 3 Intake Manifold Gasket Leaks 4 Low Fuel Pressure 5 Injector Problem 6 Low Compression 7 Wrong Air-Fuel Mixture
What can cause an OBD-2 engine to misfire?
On OBD-II cars, the OBD-II system will not only identify misfires, but also coil and injector problems. Consequently, if the (MIL) lamp is on and you find a code for a misfiring cylinder; and a second code indicating an injector fault for the same cylinder; bingo, the engine probably has a bad fuel injector.
Yet KA24DE engines have high fuel consumption (do not be surprised with it). But in total, KA24DE engine is a secure and durable motor. Nissan KA24DE engine production stopped in 2004 due to the release of more advanced 2.5L Nissan QR25DE.
It is a 2.4L inline four-cylinder engine that uses an iron cylinder block with an aluminum cylinder head. The KA24DE is the engine that almost all Nissan 240SX series used in America.
Are there any known issues with the KA24DE?
Just like any other engine, the KA24DE has a couple of known issues that are common. The distributor is known for failing on earlier versions of the KA24. Another prevalent issue is a rattling timing chain, which occurs when the timing chain gets loose from age and begins to rub against the timing chain cover.
What kind of fuel injection does Nissan KA24 use?
Oddly enough, Nissan decided to use a shim-over-bucket configuration for the valve train instead of rocker arms. The KA24 uses a Hitachi sequential electronic fuel injection system. Nissan configured some KA24 engines for front wheel drive vehicles.
What kind of girdle does a Nissan KA24 use?
When used in the passenger cars both versions of the KA24 used a crankshaft girdle, as opposed to individual main bearing caps. In the Nissan Hardbody and Frontier applications a crank girdle was not used.
What’s the difference between the KA24E and KA24DE?
As you may expect, these engines are very similar, but there are a few fundamental differences that separate these engines. The most significant difference is the cylinder head. The Ka24E was a single overhead cam engine with just three valves per cylinder, and the KA24DE was a dual overhead cam engine with four valves per cylinder.
How manybhp does a KA24DE SR20DET have?
Although many people upgrade to the SR20DET engine, many stay with the KA24DE because of its larger displacement. A naturally aspirated built can reach up to 200whp (230bhp), but it isn’t cheap. This kind of build requires full bolt-on, ported and polished head, bigger cams, and possibly a higher compression ratio.
Are there any problems with the Nissan KA engine?
All the Nissan KA Engine are interference. Nissan KA24DE Commons Problems & Regular Maintenance Nissan KA24DE belongs to the simple, reliable and durable enginesJ from the 90-s era. You need just to serve it regularly and use high quality engine oil.
What kind of compression ratio does a Nissan KA24E have?
The compression ratio is 8.6:1 or 9.1:1 for early 1989 Nissan 240SX. The Nissan KA24E engine produced 143 PS (105 kW; 140 HP) at 5,600 rpm of horsepower and 206 Nm (21.0 kg·m; 152.0 ft·lb) at 4,400 rpm of torque. The Nissan KA24E motor has a cast-iron cylinder block, cast steel connecting rods, a half-counterweighted forged steel crankshaft.
Oddly enough, Nissan decided to use a shim-over-bucket configuration for the valve train instead of rocker arms. The KA24 uses a Hitachi sequential electronic fuel injection system. Nissan configured some KA24 engines for front wheel drive vehicles.
The compression ratio is 8.6:1 or 9.1:1 for early 1989 Nissan 240SX. The Nissan KA24E engine produced 143 PS (105 kW; 140 HP) at 5,600 rpm of horsepower and 206 Nm (21.0 kg·m; 152.0 ft·lb) at 4,400 rpm of torque. The Nissan KA24E motor has a cast-iron cylinder block, cast steel connecting rods, a half-counterweighted forged steel crankshaft.
Are there balance shafts in the Nissan KA24?
Even with its relatively large displacement, the KA24 did not implement balance shafts. Later versions of this engine used a DOHC design with four valves per cylinder which increased power and efficiency. Oddly enough, Nissan decided to use a shim-over-bucket configuration for the valve train instead of rocker arms.