Why will my push start not work?
One of the most common causes of a push button start malfunction is a weak key fob battery. If you believe that this may be the case for you, hold the key fob as close to the push button start as you can while going through the motions of turning your vehicle on.
How far can you drive a push button car without the key?
If the car is already started. In the 3 cars I’ve owned with Keyless Go (Toyota, Mazda & BMW). You can drive it till you either run out of petrol or stall (manual). They do beep and notify you that the key is not present but you can drive as far as you want and turn off the car.
Why does my Toyota push button start not work?
You are not pressing firmly on the brake pedal. Make sure your foot is firmly pressed on the brake pedal while pressing the Start button. Your Smart Key battery is weak or dead. Try holding your Smart Key next to the Start button while pressing. If this doesn’t work, you may need to change the Smart Key battery.
What causes a Toyota Land Cruiser to not start?
When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Land Cruiser, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it. There are a lot of issues that can cause your Land Cruiser to crank, but not start.
Why does my Toyota Prius not start up?
If you get no lights and your battery is working, the ignition switch could be to blame. If you get dash lights, then turn the key to start to see if the lights go out on the dash. If the lights go out, your ignition switch is okay. Starter Connection – Corrosion on the starter can keep the car from starting.
Where is the starter on a Land Cruiser?
The relay what has probably gone sits behind the NS battery near the fuel filter. Has a posy screw holding a black protective cover on it. Under that is the relay. It has two 12mm nuts holding starter wires and two 10mm nuts.