Why is the immobiliser light not working on my Almera?
As the NATS light stays on and the vehicle doesn’t start this is solely on the NATS system as proved by the 2 fault codes P1614 and P1615. 1614 means that the NATS IMMU can’t see the key or the code that is set is damaged in some way.
How can I reprogram my Nissan immobiliser light?
The keys will have to be reprogrammed using the NATS code and that can be ONLY be done using Nissan Consult II, III or III+ The procedure quickdraw has stated above is for re coding the locking remote to the system and NOT the key.
What does the light blink on Nissan immobilizer?
For vehicles with Intelligent Key: This light blinks when the ignition switch is placed in the LOCK position with the key removed from the ignition switch. This function indicates the NISSAN Vehicle Immobilizer System is operational.
What should I do if my Nissan immobilizer fails to start?
If the engine fails to start using a registered key (for example, when interference is caused by another registered key, an automated toll road device or automatic payment device on the key ring), restart the engine using the following procedures. 1. Leave the ignition switch placed in the ON position for approximately 5 seconds. 2.
As the NATS light stays on and the vehicle doesn’t start this is solely on the NATS system as proved by the 2 fault codes P1614 and P1615. 1614 means that the NATS IMMU can’t see the key or the code that is set is damaged in some way.
For vehicles with Intelligent Key: This light blinks when the ignition switch is placed in the LOCK position with the key removed from the ignition switch. This function indicates the NISSAN Vehicle Immobilizer System is operational.
The keys will have to be reprogrammed using the NATS code and that can be ONLY be done using Nissan Consult II, III or III+ The procedure quickdraw has stated above is for re coding the locking remote to the system and NOT the key.
What does the Immobilizer do on a Nissan Altima?
This function indicates the NISSAN Vehicle Immobilizer System is operational. If the NISSAN Vehicle Immobilizer System is malfunctioning, the light will remain on while the ignition switch is placed in the ON position.
Why is my immobiliser light not working on my Nissan N16?
These is quite a common fault and dependsing on the age of your N16 this could be down to a poor connection to the SECU unit on the system from the NATS antenna. Nissan have released a technical bulletin for this fault and any dealer will be able to point you in the right direction.
What to do if your Nissan Altima immobilizer does not work?
If the NISSAN Vehicle Immobilizer System is malfunctioning, the light will remain on while the ignition switch is placed in the ON position. If the light still remains on and/or the engine will not start, see a NISSAN dealer for NISSAN Vehicle Immobilizer System service as soon as possible.
These is quite a common fault and dependsing on the age of your N16 this could be down to a poor connection to the SECU unit on the system from the NATS antenna. Nissan have released a technical bulletin for this fault and any dealer will be able to point you in the right direction.
Why does the Nats warning light keep coming on?
The nissan nats warning light keeps coming on after a couple minutes of driving? when you start the car it is not on. I have had it in the … read more
What is the key to the immobiliser light?
The key is in 2 parts, 1) remote locking, nothing at all to do with the NATS system, 2) the NATS chip that controls the immob system. If the vehicle locks unlocks OK the battery and the remote part of the system is ok.
When does the Immobilizer warning light stay on?
The immobilizer warning light on your Nissan X-trail stays on when you turn on the ignition on your car. Therefore you can’t start your car, and it can get very problematic especially in the morning before going to work or driving the children to school.
The key is in 2 parts, 1) remote locking, nothing at all to do with the NATS system, 2) the NATS chip that controls the immob system. If the vehicle locks unlocks OK the battery and the remote part of the system is ok.
Where is the Nats immobiliser located on a car?
NATS IMMOBILISER UNIT The NATS immobiliser unit, is normally mounted next to the ignition switch or behind the fascia area. The unit is sometimes also fitted with a dongle unit, and is fitted on right hand drive European vehicles for extra security. The NATS immobiliser controls signals to the Engine Control Module (ECM) which inhibit starting.
Is there a way to bypass the Immobilizer?
This car is equipped from factory with an immobilizer system. Many cars around this year will have the same. Simply switching ecu’s will no longer work. The code in the key and the ecu have to match in order to start the car. I’m going to show you a way how to go around that for testing purposes.
What to do if you lose your immobilizer key?
Insert the second transponder key into ignition lock cylinder for registration DO NOT TURN ON. The Security light may blink indicating it has accepted the key. After 3-5 seconds remove the second key from ignition. Security light should remain on indicating you’re still in programming mode. 4.