Why is the Check Engine light coming on on my Hyundai Santa Fe?

The check engine light on your Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it’s tightened, the light will turn itself off.

Where do I find the fault code on my Hyundai?

Connect your OBD-II scanner into the OBD-2 port under the dashboard on the driver’s side. Note: Even a $20 generic OBD-2 scanner can retrieve check engine / ECU Hyundai fault codes. Those are P-codes in the Hyundai list below.

What is mass airflow sensor on Hyundai Santa Fe?

The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is basic to run your engine efficiently by measuring the eject of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to accurate changes, identical altitude.

What are the spark plugs on a Hyundai Santa Fe?

New Spark Plugs or Plug Wires are basic for your Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel assortment in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run.

What kind of engine codes does a Hyundai have?

This list contains more than the Hyundai Check Engine Codes. Here you will find Hyundai ABS, Airbag, and Transmission DTC codes. P0244 Turbocharger/Supercharger Wastegate Sol. ‘A’ Range/Performance P0245 Turbocharger/Supercharger Wastegate Sol. ‘A’ Low P0246 Turbocharger/Supercharger Wastegate Sol. ‘A’ High

Are there any problems with the Hyundai Santa Fe?

It’s not us. Engine seized-needed complete replacement; $3,344 paid to waikem Hyundai canton, oh- engine light came while driving and car stalled. Never started again, towed to waikem Hyundai, denied warranty coverage stating no proof of adequate oil changes, even though many published reports of Hyundai Santa Fe engine failures.

Why does my Hyundai Elantra have a check engine light?

Has the check engine light turned on in your Hyundai Elantra, Accent, Sonata, Kona, or Santa Fe? It can be alarming seeing an engine warning appear on your dashboard, especially if you’ve never seen it before. A wide array of issues can cause a check engine light to come on, some more serious than others.

Where is the 2015 Hyundai Santa Fe located?

The contact owns a 2015 Hyundai Santa Fe. While driving approximately 75 mph, the vehicle suddenly decelerated to approximately 40 mph. The vehicle was taken to williamsburg Hyundai (7277 richmond rd, williamsburg, va) where it was diagnosed that the engine was faulty and needed to be replaced. The vehicle was not repaired.

Is the hyndai Santa Fe a good car?

Yes, the Hyundai Santa Fe is a good midsize SUV. It has just about everything most people look for in a vehicle: good gas mileage, a smooth ride, comfortable seats, and a quiet cabin.

What causes the Check Engine light to come on in a Hyundai?

In a Hyundai, the check engine light comes on as soon as the onboard diagnostic system ( OBD ) detects that there’s an issue with the way the engine operates or Evaporative Emission Control System ( EVAP) which is used to prevent gasoline vapors from escaping into the atmosphere. A fault code stored in…

What is Hyundai Santa?

Hyundai Santa Fe . The Hyundai Santa Fe (Korean: 현대 싼타페) is a sport utility vehicle (SUV) produced by the South Korean manufacturer Hyundai since 2000.

What is Santa Fe vehicle?

The Hyundai Santa Fe (Korean: 현대 싼타페) is a sport utility vehicle (SUV) produced by the South Korean manufacturer Hyundai since 2000.

How can I tell if my Santa Fe is having problems?

This will help your mechanic evaluate the issue. Steady Check Engine Light: If your check engine light is on every time you operate your Santa Fe, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises.

What does the malfunction indicator light on a Hyundai mean?

On Hyundai cars, this is called the Malfunction Indicator Lamp (MIL), but you’ll probably know it as the check engine light. When the check engine warning light is illuminated it’s often accompanied by tell-tale signs that the engine is not working properly, such as a lack of power or stuttering as you press the accelerator.

What does check engine light on Hyundai Santa Fe mean?

A check engine light can indicate a broad spectrum of problems with your 2009 Hyundai Santa Fe. In some cases you need to pull over immediately to prevent damage while in others you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light.

What causes a check engine light on a Hyundai?

Fortunately AutoNation Hyundai North Richland Hills is here to help you figure out what might be wrong, and what your next steps should be. Below we have highlighted the most common causes of a check engine light. Loose Gas Cap: Your gas cap is loose, broken, or simply missing.

Why is the battery light on in my Santa Fe?

A bad alternator will usually make itself known when the engine is already running. If you see your Santa Fe’s battery light turns on while the engine is already running, that is a strong indication that the alternator is no longer providing enough wattage to power the various electrical systems and charge the battery at the same time.

What does it mean when your check engine light is flashing?

A steady glow typically means something less serious but a flashing check engine light indicates that your vehicle’s engine is in serious trouble and service is needed immediately. If your check engine light is flashing in your Hyundai Santa Fe, we highly recommend not to drive the vehicle and schedule Hyundai service today.

Why does the service engine light come on?

The service engine light comes on in your vehicle because the computer has diagnosed that something isn’t quite right. When the light comes on, a code is stored as the reason for triggering the light.

Is this the Check Engine light?

When it runs into an issue that the ECU cannot correct, the check engine light (CEL) starts glowing. The light is typically yellow or orange , and features an image of engine with text telling the driver to check or service the engine or powertrain.

Why is the engine light on?

A loose fuel cap is one of the most common reasons why the check engine light turns on. The cap is a crucial part of a car’s fuel delivery system. It notably prevents gasoline fumes from leaving the fuel tank, and it helps keep the whole system under the correct pressure.

What can a faulty O2 sensor do to a Hyundai Santa Fe?

A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Hyundai Santa Fe’s spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to suggest the polite assortment of air and fuel that enters the cylinders in your engine.

What should I do if I fail the emissions test?

Turn off your “Check Engine” light (if needed). In most states, an illuminated “check engine” light is an automatic failure during an emissions test. 6. Find a shop that offers a free retest. If you fail your test, you will get another try without additional cost.

Why does my Hyundai Santa Fe not accelerate?

Here are the most common cause of acceleration with the RPM’s going up: 1. Transmission Fluid Low. If your Santa Fe is too low on transmission fluid, it’ll will no longer be able to transfer power to the rear wheels. The power goes to the torque converter, and that’s the end of the line. You should check the transmission fluid immediately.

What causes a Hyundai Santa Fe engine to misfire?

There are other misfire related codes as well, but those are the most common ones. Keeping in mind that any engine needs air, fuel, and spark for ignition, your Hyundai Santa Fe’s fuel system can often cause the engine to misfire. It can run too lean or rich.

What causes a vacuum leak in a Hyundai Santa Fe?

Every Hyundai Santa Fe has a vacuum system that performs a enormous mixture of functions. The vacuum system also helps deduction harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause.

What is the OBDII code on a Hyundai Santa Fe?

One of the most common trouble codes with the Hyundai Santa Fe is the P0442 code. This code number references a number that is given to you when you plug your vehicle into a OBDII scanner. It’s typically not going to be a problem that’ll lead to an immediate breakdown, but it should not be ignored.

What are the symptoms of Hyundai Santa Fe p0442?

Hyundai Santa Fe P0442 Code Symptoms With the Santa Fe, P0442 will often be thrown after the engine after refueling. After which it’ll bedifficult to start the engine. This is the most common symptom of this trouble code. You’ll fill up the vehicle and it just won’t start.

What happens when a Hyundai Santa Fe loses power?

The vehicle shut off while driving in a parking lot. Driver lost the ability to control the vehicle creating a hazard. The vehicle was unable to be restarted for at least 10 minutes. Upon acceleration at an intersection the vehicle shut off and we were not able to restart it for at least 15 minutes.

What kind of engine does Hyundai Santa Fe have?

Car is a 2006 Hyundai Santa Fe with the 2.0 CRDT diesel engine. Apparently it can go for a couple of hundred miles ok then has a loss of power and it sounds like its going into limp home mode and not going over 3000rpm.

Is there a gas leak in my Hyundai Santa Fe?

Took my car to a two mechanics who both said there is a gas leak in the evaporator of the emission control system. I read online that this issue is common with Santa fes and I believe the company should issue a recall and get this dangerous issue fixed. The contact owns a 2008 Hyundai Santa Fe.

What kind of engine problem does Hyundai Santa Fe have?

The contact owns a 2008 hyundia Santa Fe. While operating the vehicle, the check engine indicator illuminated and the fuel gauge indicator provided false readings. The vehicle was not diagnosed or repaired.

Is the fuel gauge on my Hyundai Santa Fe inoperable?

Tl the contact owns a 2008 Hyundai Santa Fe. While fueling the vehicle, the fuel gauge became inoperable and failed to provide an accurate reading. In addition, while driving, the contact could not determine when the fuel was low.

Why is my Hyundai Santa Fe fuel gauge not working?

So many owners have had this issue, it’s irresponsible of Hyundai to not repair the faulty parts given so many complaints. as with those who have had the same problem regarding fuel gauge failure /check engine light, could run out of gas a cause serious problem.

The main categories of concern regarding the 2012 Hyundai Santa Fe deal with the engine of the users, along with the numerous complaints by the NHTSA, focusing on the engine, the brakes, and the electrical system.

Why is my Santa Fe hard to start?

The fuel system concerns regarding the 2007 Hyundai Santa Fe had to do with the fuel gauge not reading correctly, the check engine light coming on, the car being hard to start after filling the fuel tank, the pump shutting off while filling the tank, the gas cap cover sticking, and the fuel gauge not reading at all.

When did the Hyundai Santa Fe come out?

In 2012, the Santa Fe became available in two versions, with the five-seater sport in 2012. Despite being very popular in the United States and breaking sales records, the Hyundai Santa Fe problems caused some issues with potential buyers and the NHTSA during certain model years.

How much does a Hyundai Santa Fe engine heater cost?

The best part is, our Hyundai Santa Fe Engine Heaters products start from as little as $20.99. When it comes to your Hyundai Santa Fe, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Engine Heaters product and part brands so you can shop with complete confidence.

What to do if your Hyundai Santa Fe has air conditioning problem?

Avoid a trip to the mechanic by trying to troubleshoot problems yourself in your Hyundai Santa Fe. Air conditioning problems are quite common, and can often be quite simple to diagnose and even fix. Take a few easy steps to try and determine the cause of the air conditioning problems. See if the problem is as simple as a blown fuse.

What are the repair procedures for a Hyundai Santa Fe?

1. Check that the battery terminals are not loose or corroded. Check the fuses for continuity. 2. If any defect has been found, replace the drive belt. Cracks on the rib side of a belt are considered acceptable. If the belt has chunks missing from the ribs, it should be replaced. 3. 4. Check that the wiring is in good condition.

Why does my 2017 Hyundai Santa Fe not start?

See all problems of the 2017 Hyundai Santa Fe . Navigation screen does not turn off after the ignition is turned causing the battery to drain and car will not start. My new 2019 Hyundai sante fe from the time I bought it had the yellow check engine light come on. It said the bsm system wasn’t working.

What kind of Fuse does a Hyundai Santa Fe have?

Hyundai Santa Fe (2004 – 2006) – fuse box diagram Year of production: 2004, 2005, 2006 Engine compartment Description Ampere rating [A] Protected components FUSIBLE LINK ALT 120 Generator B+ 50 Tail lamp relay, Fuse 11~17, Power connector IGN 50 Start relay, Ignition switch BLR 40 A/C Fuse, Blower relay ABS.1 30 ABS control module, …

What causes a flashing check engine light on a Hyundai Santa Fe?

While a majority of the time, the flashing check engine light is going to be caused by a misfire related to your Santa Fe’s ignition system or fuel system (as stated above), there are other issues that can cause it. Your timing chain could have jumped.

What does a flashing check engine light mean?

A flashing check engine light is your Hyundai Santa Fe’s way of saying “I have a serious problem, don’t ignore me”. Most of the time, that serious problem is a misfire. This flashing light should not be ignored. When your engine is misfiring, it is dumping raw fuel into the exhaust.

What’s the Check Engine code on my Santa Fe?

I have a 2009 santa fe. The check engine light came on with a p0441 code. The car runs fine. I have replaced the fuel – Answered by a verified Hyundai Mechanic We use cookies to give you the best possible experience on our website.

Why is the Check Engine light on in a Hyundai?

The Hyundai Tucson malfunction indicator light (MIL), often referred to a the check engine light comes on and stays on when there’s a malfunction with the emission control system. Usual causes of the check engine warning light are faulty mass airflow sensor, faulty oxygen sensor or faulty exhaust gas recirculation valve (EGR).

What does the malfunction indicator light mean on a Hyundai?

Hyundai Elantra: Malfunction indicator light (MIL) (check engine light) This indicator light is part of the Engine Control System which monitors various emission control system components. If this light illuminates while driving, it indicates that a potential malfunction has been detected somewhere in the emission control system.

Though experiences vary per owner, some have had serious trouble with the 2019 Santa Fe. Some owners have problems with the vehicle’s tech/electrical systems interfering with the engine. Others say their engines “rattle,” shut off while idling, lose power and/or acceleration, and experience other problems.

What kind of engine does the Hyundai Santa Fe have?

The 2021 Hyundai Santa Fe boasts a brand-new powertrain. According to Hyundai, the new engine is an inline-four producing 191 hp and 181 lb-ft of torque. And higher trims boast an inline-four turbo harnessing 277 hp and 311 lb-ft of torque.

Is there an engine management warning light for Hyundai?

Hyundai Engine Management Warning Light Need To Diagnose – YouTube Engine light & fault reset tools here http://www.diagnostic-world.com/ Engine light & fault reset tools here http://www.diagnostic-world.com/

Can a Hyundai Santa Fe airbag warning light be removed?

You can diagnose the engine module with the iCarsoft i901 Hyundai OBD Code Reader which will also allow you to clear the fault codes and remove the engine warning light from the dashboard. Hyundai Santa Fe airbag warning light – the airbag symbol lamp will only illuminate if there is an issue or fault in this system.

How many emission control systems does a Hyundai Santa Fe have?

Your vehicle is equipped with an emission control system to meet all emission regulations. There are three emission control systems which are as follows.

When does a Hyundai Santa Fe have a gas leak?

When there is a small leak in the Hyundai Santa Fe’s EVAP system, it will throw the P0456 OBDII Code. If there is a large leak, it’ll throw P0455. P0456 code will typically not be accompanied by any noticeable symptoms other than the smell of gas and the service engine soon light.

What is the trouble code on a Hyundai Santa Fe?

This trouble code references a number that is given to you when you plug your Santa Fe into a OBDII scanner. P0456 Indicates that there is a small leak in the evaporative emission control system.

What causes Hyundai Santa Fe to fail emissions test?

The Santa Fe’s ECM will trigger this code when it detects that the vacuum level in the Purge System is not within the proper specifications. P0441 can cause the vehicle to fail an emissions test.

What are the safety features of a Hyundai Santa Fe?

The 2008 Hyundai Santa Fe offers an impressive array of standard safety features including antilock disc brakes (with brake assist), traction control, stability control, front seat side airbags, full-length head curtain airbags and active front-seat head restraints.

A very common problem with this model. It actually has two sensors because the tank is split over the axle under the back seat” “Fuel level sensors (2 of them) failed and needed to be replaced. Because there are 2 of them, it is costly with parts and labor. This is a common failure of this vehicle based on forums.

What is the reliability score of a Hyundai Santa Fe?

The Reliability score is based on our latest subscriber survey of 2008 Hyundai Santa Fe owners. The owner comments describe problems respondents experienced with this vehicle.

What are the problems with a 2004 Hyundai Santa Fe?

Worst 2004 Hyundai Santa Fe Problems #1: Paint Is Wearing Off 2004 Santa Fe Average Cost to Fix: N/A #2: Runs Rough, Check Engine Light On 2004 Santa Fe Average Cost to Fix: $2,500 #3: Loss Of Power, No Acceleration 2004 Santa Fe Average Cost to Fix: $5,000

What to do if your Hyundai Santa Fe malfunctions?

Check under the vehicle, around the rear areas of the vehicle, looking for any vacuum lines that have dry-rot cracks, holes or loose/missing connections. If these all check out, then the best thing to do at this point is to have the Diagnostic Trouble Codes (aka “p-codes”) read from the on-board computer.

What to do if your check engine light is on?

This free video provides the steps to diagnose and clear a check engine light on a 2009 Hyundai Santa Fe Limited 3.3L V6. The video also provides steps on how to read the 2009 Hyundai Santa Fe Limited 3.3L V6 trouble code About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Hyundai Santa Fe 2009