Why is my sump pump not pumping water?
If your sump pump will not start, there are a few possible causes: The float switch is not being raised up high enough by the water level to trigger the pump to turn on. The pump is not receiving the right amount of electricity. The impeller is jammed with some kind of debris.
Why does my Honda Accord quit on itself?
This owner’s car just “quit,” and one reason for that might be a problem with the main relay—an electronic device that opens and closes the fuel supply to the engine. This happens most often when the car is overheated, and it’s something the novice can certainly troubleshoot .
What should I do if my Honda Accord has no spark?
In this case, the owner replaced the fuel pump, but the problem was elsewhere. Don’t be discouraged when this happens. Although it costs more money when you have to replace multiple parts in your car to solve a problem, this is the burden of the DIY mechanic. And think of all the money you’ve saved by working on your own car!
Where is the ECM on a Honda Accord?
The ECM for Honda Accords is located under the passenger’s side carpet. If the connectors as well as the wires are properly fastened and in tact, move on to the next step. Usually, an engine doesn’t suddenly develop problems with its compression. It takes some time to damage the hard metal parts enough to completely shut a motor down.
What should ignition resistance be on Honda Accord?
To check the ignition coil, measure the resistance between the + terminal (black/yellow wire) and the – terminal (white/blue wire) of the coil. The resistance should be about 0.6 to 0.8 ohms at 70° F. Then check the resistance between the + terminal (black/yellow wire) and the coil wire terminal. It should be about 12,000 to 19,200 ohms at 70° F.
Why does my Honda Accord turn itself off?
1997 to 1999 Accords have a known problem with their ignition switch, which causes your cluster to die at the same time your engine cuts out. This is likely a power supply problem, and the car will turn itself off sporadically. For these Accord model years, a recall is in effect. Contact a dealership to have the ignition switch replaced.
Why does my car not start in deep water?
If the water was deep enough to go into the breather system and get into the engine you could be looking at a hydrolock condition .
The ECM for Honda Accords is located under the passenger’s side carpet. If the connectors as well as the wires are properly fastened and in tact, move on to the next step. Usually, an engine doesn’t suddenly develop problems with its compression. It takes some time to damage the hard metal parts enough to completely shut a motor down.
What to do when water isn’t circulating through the outboard motor?
What to Do When Water Isn’t Circulating Through the Outboard Motor. Outboard motors rely upon simple mechanical systems that push water through the engine in order to maintain temperature and avoid overheating. When water flow through the outboard motor is disrupted or stopped entirely, overheating occurs.