Why is my injector pump not working properly?
The injector pump draws fuel from the feed supply and distributes high pressure fuel to the injectors and the spill circuit. Air leaks and fuel restrictions reduce the amount of fuel that the lift pump delivers to the injector pump. Worn components inside the injector pump reduce the pump output and lead to poor or non-running conditions.
What causes the fuel pump to not start?
The fuel pump is running and delivering normal pressure to the engine But, with all that working your engine still will not start. So, the most likely cause, is that the fuel injectors are probably not opening. The (PCM) uses the trigger signal from the crankshaft position sensor; and/or camshaft position sensor to pulse the injectors.
What should I do if my fuel injection pump is stuck?
If it is stuck then don’t tap or hit it as it will damage it. You would need to take it to a diesel engineers to have the seized element replaced if you have no luck. With the TEF fuel injection pump you can also remove the cover plate to look inside at the components. Share This Story, Choose Your Platform! Comments are closed.
How to troubleshoot a Yanmar diesel injection pump?
Poor adjustments of the governor and bad fuel timing can mimic injector pump problems and should be eliminated as possibilities before tackling the injector pump. Check the fuel level in the tank. Ensure that the fuel level is sufficient to cover the fuel pickup and prevent any air from being drawn into the system in the fuel tank.
The fuel pump is running and delivering normal pressure to the engine But, with all that working your engine still will not start. So, the most likely cause, is that the fuel injectors are probably not opening. The (PCM) uses the trigger signal from the crankshaft position sensor; and/or camshaft position sensor to pulse the injectors.
What happens if the fuel injector doesn’t close?
If the injector can’t close, cylinder performance is compromised. Whenever the fuel injector pump’s O-rings or ball seats are defective, the timing of the fuel transfer process is disrupted. This is a common diesel fuel injector pump glitch, and usually requires a complete injection pump rebuild or replacement.
Can a car start with no fuel in it?
Once your fuel pump has finally given up the ghost, no fuel will reach your engine. You may hear your spark plugs firing when you try to start your car, but without fuel, the engine won’t be able to turn over. Of course, there could be other explanations for your engine’s failure to start besides a failed fuel pump.
What’s the pressure of a diesel injector pump?
Today’s diesel fuel injection pumps are under pressure – even more pressure than what was once considered “normal.” Around 15-20 years ago, it was common for fuel injector pumps to process fuel in a system at around 10,000 to 15,000 psi (pounds per square inch). But that’s only about half of what engines are expected to do today.