Why is my height control not working on my LX470?
Unlike complete suspension conversion like on this LX470, this solution was much simpler. The guest’s initial concern was that the Active Height Control (AHC) indicator would intermittently show “Off” and no long accept inputs from the height control switch on the center console.
What was the problem with my Lexus LX 470?
My 2002 LX 470 was having problem of not able to adjust the control height to normal or high and just staying in the low position making the ride so bumpy. Read some articles about it and they mentioned about the height sensors to be the culprit. One sensor is too expensive that I decided to open and clean the inside first and see if it works.
Why is my height control not working on my Land Cruiser?
The guest’s initial concern was that the Active Height Control (AHC) indicator would intermittently show “Off” and no long accept inputs from the height control switch on the center console. This is different than a typical AHC failure, as the indicator normally blinks repeatedly to indicate a malfunction.
What was the problem with the height control?
The dampening control (also run through this switch) in addition to the up/down controls had continuity across the board, the switches were all showing partial short, and the connector was too sticky to handle. A new switch was installed and the AHC performed without flaw.
Unlike complete suspension conversion like on this LX470, this solution was much simpler. The guest’s initial concern was that the Active Height Control (AHC) indicator would intermittently show “Off” and no long accept inputs from the height control switch on the center console.
My 2002 LX 470 was having problem of not able to adjust the control height to normal or high and just staying in the low position making the ride so bumpy. Read some articles about it and they mentioned about the height sensors to be the culprit. One sensor is too expensive that I decided to open and clean the inside first and see if it works.
The guest’s initial concern was that the Active Height Control (AHC) indicator would intermittently show “Off” and no long accept inputs from the height control switch on the center console. This is different than a typical AHC failure, as the indicator normally blinks repeatedly to indicate a malfunction.
What happens when you reset the ECU on a Lexus?
The ECU stores diagnostic trouble codes when it senses a malfunction so a mechanic can fix it later. It’s also the ECU’s job to store your driving data to customize your ride. For around the first 1,000 miles of the ECU being reset, the car adjusts to the driver’s typical driving style.
The dampening control (also run through this switch) in addition to the up/down controls had continuity across the board, the switches were all showing partial short, and the connector was too sticky to handle. A new switch was installed and the AHC performed without flaw.
Is there a problem with my LC 4.2 VX?
I’VE YTHE SAME PROBLEM WITH MY LC 4.2 VX, HDJ101 MODEL. I’VE REPLACE THE 4 ACCUMULATORS, HEIGHT CONTROL PUMP (BELOW THE HYDRAULIC TANK), CHECK ALL 3 SENSORS. BUT TILL TO DATE, AFTER MORE THEN 3 WEEKS, I’M UNABLE TO LOCATE THE FAULTS. WILL APPRECIATE IF ANYONE CAN SHOOT ME THE ANSWER. THANK YOU