Why is my Harley Davidson Softail not working?
These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause. This article applies to the Harley Davidson Softail.
How does a Harley Davidson Softail engine work?
This article applies to the Harley Davidson Softail. To start your Softail’s engine and keep it running, there must be a constant supply of electricity going into and out of the battery.
How to check DTC’s on a Harley Davidson Softail?
Press and hold the mute/power button, and then turn the ignition switch to accessories. Keep the mute button held as the system starts up and for three seconds after the warning screen appears. Press the accept option on the touchscreen, then select “DTC’s.” Any active codes will be displayed at this time.
What should battery voltage be on Harley Davidson Softail?
Attach the positive voltmeter lead to the positive battery post and the negative to the negative. The battery should read above 12.2 volts. If your Softail will start, keep the voltmeter connections in place and start the engine. The charging system should now be working and battery voltage should increase to above 14 volts.
What does it mean if your Harley is not starting?
Harley Wobble – Read More 2. Harley Not Starting – Read More 3. Harley Started to Misfire – Read More 4. Oil Dripping from Harley Air […] […] Harley Wobble – Read More 2. Harley Not Starting – Read More 3. Harley Started to Misfire – Read More 4.
Why does my Harley Davidson stall at a stop sign?
After I’ve been riding for awhile and the engine warms up it will idle stronger and is usually fine, but once in awhile when I start from a stop sign or light it will stall and I’ll have to give it some throttle to start and idle up. Of course it never does it when the dealer has it.
What to do when your Harley starts stalling?
Start the bike cold. Mist the intake flanges with brake cleaner. If your bike’s idle drops, or the engine stalls, you have an intake leak. If this is the case, replace the intake seals along with the front & rear intake flanges. If the bike passes the intake test; have the dealer or your mechanic scan the m/c for possible codes.
What causes a Harley Davidson to not turn over?
If the bike does not turn over, the issue can be battery, starter, starter relay. If turns over, but no start, determine if the issue is electrical or fuel related. Check for spark.
How to diag a 2013 Harley Davidson Softail?
This method works for 2013 and earlier year models. Move your kill switch to the run position. Press and hold the black odometer reset button and turn the ignition switch to the ignition position. Hold the reset button until the message “DIAG” appears. Press and release the odometer button to access the module selection menu.
When to change stator on Harley Davidson Softail?
If the readings are low or zero, switch your meter to reads ohms, shut off the engine, and read the resistance between all five wires. A proper reading is around 0.2 ohms. The reading infinite or “OL” on your meter indicates an open circuit. The stator must be replaced.
When to check oil level on a Softail bike?
Check your owners manual. Mine says to check oil on a warm engine after allowing the (already warm) engine to idle for one or two minutes. It varies on softail models as to check bike level or on the jiffy stand , found out mine is supposed to be checked level NOT on the jiffy stand.
When does a Harley Davidson engine cut off?
Discussion in ‘ Softail Models ‘ started by TKLA, Apr 25, 2011 . I have a 2000 Harley Fatboy, 1450 carb, 8000 miles. No problems riding under 40/50 mph but if i go faster – ex. freeway ,my engine cuts off.
How can I fix 2003 Harley flhtcui circuit breaker shutdown?
I called Harley in Milwaukee and they said to put new connectors on the wires to the CB and solder them. Did that. I tested one breaker but not all of them. The bike has power to start and go, then it will shut down on its own.
When was the last time my Harley died?
Yesterday (Thursday) I road her to work, going out after work, and home (~40mi) just fine, nothing out of the ordinary. Figured I was in the clear and it was just some freaky coincidence the day before
How to check the electrical system on a Harley Davidson Softail?
Record the code number to research possible causes. Press and hold the odometer button to clear the code, and then shut off the ignition to exit the menu. Repeat the process to check the other systems.
What should my Electrical reading be on my Softail?
A normal reading is around 100 amps. If your reading is higher, you may have mechanical engine damage, a faulty starter, or high resistance in the wiring routed between your starter and battery. The wiring can be checked fairly quickly. Place your multimeter’s negative lead on the starter ground wire and the positive lead on battery negative.
What kind of engine does a Softail Deluxe have?
Pure nostalgic beauty wrapped around the modern power of a high output Twin Cam 103B™ engine.If feels better than anyone remembers.There aren’t th… 2013 Harley-Davidson Softail Deluxe FLSTN, The Softail Deluxe for 2013 features a 103ci V-Twin with 2 valves per cylinder, a 6-speed transmission, an…
How many miles does a softtail Deluxe have?
Windshield, newly added Daymaker headlights, back rest and power outlet on handlebar. Only 23,096 miles an… 2008 Softtail Deluxe, tons of extras, comes with the original spoked wheels. She has a fresh service and has been garage kept her entire life.
These systems must stay properly powered by the battery. The wiring connecting the systems together must remain intact. These problems occur and, although difficult to find at times, a series of test will help you narrow down the cause. This article applies to the Harley Davidson Softail.
Record the code number to research possible causes. Press and hold the odometer button to clear the code, and then shut off the ignition to exit the menu. Repeat the process to check the other systems.
Where is the fuse on a Harley Davidson Softail?
Looking inside the fuse box, you’ll see a 40 amp fuse. This is the main fuse protecting the circuit between battery positive and the starter motor. There should be 12 volts on both sides of this fuse with the ignition on. Touch the positive test lead to the fuse blade and the other to a good ground. 12 volts should display on your meter.
Where are the black wires on a Harley Davidson Softail?
The black wire connects to the main wiring harness ground near the battery. The other three black wires go to the stator. Make sure these wires are all clean and tight. Spray some electric terminal contact cleaner on the connections to promote conductivity. To test the stator, you’ll need a volt meter set to AC volts.
Attach the positive voltmeter lead to the positive battery post and the negative to the negative. The battery should read above 12.2 volts. If your Softail will start, keep the voltmeter connections in place and start the engine. The charging system should now be working and battery voltage should increase to above 14 volts.
Looking inside the fuse box, you’ll see a 40 amp fuse. This is the main fuse protecting the circuit between battery positive and the starter motor. There should be 12 volts on both sides of this fuse with the ignition on. Touch the positive test lead to the fuse blade and the other to a good ground. 12 volts should display on your meter.
The black wire connects to the main wiring harness ground near the battery. The other three black wires go to the stator. Make sure these wires are all clean and tight. Spray some electric terminal contact cleaner on the connections to promote conductivity. To test the stator, you’ll need a volt meter set to AC volts.