Why is my bike lock not opening?
The lock may be corroded inside which has jammed it. You might try spraying a little WD-40 or similar product into the lock and see if this frees it up. If something has broken in the lock, then you’ll have to cut the cable using bolt cutters.
Is it possible to remove a bike lock without a key?
This should be considered a last resort. If your you use a cable lock to secure your bike you should be able to remove the lock without the need of power tools. A pair of wire cutters or a pair of bolt croppers/cutters should do the trick. This is one of the safest and easiest ways to remove a bike lock without keys.
What happens if you put the wrong key in the lock?
If the key turns but doesn’t engage the lock, it was installed incorrectly and/or the cylinder tailpiece is missing. You will need to take it off and make sure the piece to turn the latch is long enough to engage. However, if the key doesn’t turn, then it is the wrong key (this can be a factory mistake). Thanks!
What can I put on my lock to keep it from turning?
After you’ve applied WD-40 to the lock, the interior pins should disengage with no resistance and the cylinder should easily rotate when you turn your key. Lubricate the locks around your home with WD-40 regularly to keep them maintained. Get a tube of powdered graphite.
What’s the best way to pick a bike lock?
Now, to pick your bike lock, you’ll need to insert your tension wrench into the keyhole (plug) and apply some tension to the cylinder. From here, insert your picking tool and feel for the key pins. Once you have located the first key pin you’ll want to slowly nudge it up, maintaining tension with the wrench.
What should I do if I lost my bike lock?
If you’ve lost the keys to a bike lock that is currently securing your bike, and haven’t been able to find/obtain a spare key, you’ll most likely have to cut it off. Only attempt this yourself if you know what you’re doing and have the correct tools & safety equipment.
Can you replace the Fork Lock on a Harley Davidson?
If you ever lose the key to your Harley Davidson or purchase a used Harley without keys, you will need to replace your ignition switch and fork lock assemblies. These assemblies are, typically, keyed to match. That is, you should be able to use the same key for both ignition switch and the Harley fork lock.
Why is my Fork Lock not working properly?
If the set screw is too tight, the lock will not function smoothly/correctly. After reinstalling the front end and testing the key one more time, a wipe of black silicone will seal the set screw and the assembly from the elements.
Where can I get new bike lock keys?
You can order new bike lock keys from your local specialist retailer. Much like Kryptonite Keys, when you purchased your lock you should have received a security card which has a code on it that enables new keys to be cut. On their website, you can use the dealer search tool (follow the link above) to find your nearest specialist dealer.